[Healeys] A Riveting Question

[Jean Caron]

They are, when installed, on the engine side with the rivet going through the first lip of the buffer only and the legs of the rivet being covered  by the second lip.

Jean

Sent from my Bell Samsung device over Canada’s largest network.
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Patrick and Caroline Quinn via Healeys <healeys at autox.team.net>
Sent: Tuesday, November 21, 2023 3:03:48 PM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: [Healeys] A Riveting Question


Greetings



A riveting question.



I assume that everyone is familiar with the rubber buffers that are affixed with copper rivets and flat washers to the front shroud openings on all Big Healeys.



The big and riveting question is that once installed, are the rivet heads on the engine side of the buffer, or on the other side facing the outside of the car.



Thank you



Patrick Quinn

Blue Mountains, Australia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20231121/2a05ffe1/attachment.htm>