[Healeys] Bonnet hinge on BT7

[Richard Jim Hockert]

Its an adjustment, inside or outside or different on each side.  Make the gaps even. 

Best regards,
Jim

> On Apr 3, 2025, at 3:40 AM, Simon Lachlan via Healeys <healeys at autox.team.net> wrote:
> 
> 
> Or hood!
> 
> So, I had my bonnet resprayed – don’t ask – and drove the car the 100 yds(!) to the spray shop whereupon we could not decide whether the arms/hinges go outside or inside the mating surfaces on the bonnet ie to which the hinges are bolted. Of course, I should have taken a photo but was in a last minute panic for other and better reasons! (MkII BT7).
> 
> In the end, we went with hinges outside, bolts facing inwards. Seems to work but was not easy to get a nice gap all round.
> 
> What’s the collected wisdom?
> 
> Thanks,
> 
> Simon
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rjhco459@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250403/52058eb7/attachment.htm>