[Healeys] 3000 turn signal control box access

[Al Fuller]

Ken, it's mostly just relays and terminals in the box. Try cleaning them up
before investing in new...

I can't remember having to cut the hose to get access, so I'm wondering if
you can get it to move by loosening all of it's mounts?

Finally, I think I remember being able to remove a relay box with the hose
in place by working across the car from the other side. It was painfully
slow, but doable, especially when using something to keep my body weight
off the fender.

Good luck on your mission!

________________
Sent from my phone
Best Regards,
Al Fuller

On Wed, Dec 3, 2025, 9:16 PM Ken Freese via Healeys <healeys at autox.team.net>
wrote:

> I have traced the fault of my left front turn signal to the big control
> box on the left inner fender. The upper mounting screw of the box is
> under the fresh air duct. I think I have to cut the duct as I can't
> shove it back towards the carbs more than a couple of inches. I thought
> of piecing the duct back together with some large pvc sleeve inside it.
> What does the list think?
> Also are the repro relay boxes any good?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/alfuller194@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20251204/b8ca3576/attachment.htm>