[Healeys] Axle tube measurement required

[m.g.sharp at sympatico.ca]

Mike, I think I understand the measurement you want – see the photo to confirm.   I get the odd size of 1.366”.  I cleaned the inside of the tube so I think that is a good measurement.  That diameter only continues for about 1.5” up the tube,  then the tube diameter increases; I can just feel the change with my finger.

 

Give me a call if you want to walk me through anything.  519 841 0676.

 

Mirek

 

 

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Michael Salter
Sent: March 17, 2025 10:02 AM
To: healeys at autox.team.net
Subject: [Healeys] Axle tube measurement required

 

Does anyone have the rear half shafts out of their hypoid (5 stud) rear axle and could get me a measurement of the inside diameter of the tube upon which the wheel bearing is mounted?

I am modifying a tool for the hub nut.

 

M

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250317/56abdfe5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BT7 rear axle .JPEG
Type: image/jpeg
Size: 809475 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20250317/56abdfe5/attachment.jpe>