[Healeys] Re - Correct v-belt

[mike brooks]

Someone was asking what the situation was for the 100-4. I researched this recently and certainly in the UK it's like this:-
- Original pulleys are built for a 3/4" belt. 3/4" = 19mm. Not now available.
- 'B' sized belts are 17mm wide.
- 'C' sized belts are 22nm wide.
Both currently available belts have slightly the wrong V angle on them.
What I've found is that the C belt is way to wide and stiff. The B belt, whilst sitting a bit low in rhe pulley, actually works fine in practice. The last one I took off had done 20 years.
Mike '56 BN2 Scotland 

Yahoo Mail – Email Simplified
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250330/b6823b8e/attachment.htm>