[Healeys] BJ8 calipers after 27605. (Late)

[Jake V]

Type 16P is correct, that's what you're showing. You'll want to get the
seal between the halves as well, it's not included in the rebuild kit.
Bolt torque recommendations are 75ft-lb for the Ø7/16 pair and 45ft-lb for
the Ø3/8 pair.
Caveat: Those torque numbers aren't available from the manual, some TR6s
used the same 16P calipers. I found a thread with that info from TRF tech
assistance.

https://mossmotors.com/583-820-seal-between-caliper-halves?qty=1

On Fri, Nov 14, 2025 at 12:36 PM <dwernervt at gmail.com> wrote:

> Looking to verify that this is an original caliper as I need to order the
> correct repair kit and SS pistons.
> Thanks!
> Dan Werner
>
>
>
>
>
>
>
>
>
> Sent from my iPad_______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/britishauto@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20251114/09c3c7a0/attachment.htm>