[Healeys] Engine block plugs

[Harold Manifold]

Perry,

Tap all of the holes for a standard NPT plug. Use plugs that tighten flush with a hex key. All of those plugs should have been removed for a more thorough cleaning.

Regards,
Harold

> On Sep 5, 2025, at 4:31 PM, Perry Small via Healeys <healeys at autox.team.net> wrote:
> 
> Listers. Any advice on this info request…  
> Recently had a BJ8 engine block hot tanked and cleaned.  Unfortunately, Machine shop drilled out all the small brass oil and water gallery plugs.  Do you know of a source for those or info on the dimensions to fabricate them?
> End copy
> 
> Perry
> Sent from my iPhone
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/manifold@telus.net
>