From drberkowitz at hotmail.com Mon Nov 2 13:22:48 2026 From: drberkowitz at hotmail.com (Leonard Berkowitz) Date: Mon, 2 Nov 2026 20:22:48 +0000 Subject: [Healeys] BJ7 OD Relay Message-ID: I recently installed a newly rebuilt overdrive in my BJ7. It appears to be working fine. All electricals seem to be working well except for the new relay I purchased from Moss. It seems to work well for a while and then not work. I spoke to John at Quantum Mechanics who sold me the rebuilt OD. He claims that the new relays from Moss have a 100% failure rate. He suggested using a solid-state relay. I would prefer staying with the original style. Does anyone know of a supplier that has a reliable relay. Thank you Len Berkowitz -------------- next part -------------- An HTML attachment was scrubbed... URL: From david at dleong.org Mon Nov 2 13:45:33 2026 From: david at dleong.org (David Leong) Date: Mon, 2 Nov 2026 20:45:33 +0000 Subject: [Healeys] Spotted at CSRG races this weekend Message-ID: <55509b7ecb5e431bbc973da259ebedf7@DLEONG-EXCH.dleong.pro> This is Walt Sikes' 100-4 just off a 2 year race prep project on its' third outing racing at a CSRG event Oct 30-Nov 1 at Thunderhill Raceway California. Has the full catalogue of Dennis Welch parts on it. [cid:image001.jpg at 01DD6AC7.A8127140] [cid:image002.jpg at 01DD6AC7.A8127140] Dave -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 1066902 bytes Desc: image001.jpg URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 1006783 bytes Desc: image002.jpg URL: From simon.lachlan at alexarevel.plus.com Wed Nov 4 07:59:55 2026 From: simon.lachlan at alexarevel.plus.com (simon.lachlan at alexarevel.plus.com) Date: Wed, 4 Nov 2026 14:59:55 -0000 Subject: [Healeys] Vredstein T-trac 2 Message-ID: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> Sorry to wake this topic up again.... My 3000's tyres are 14 yrs old. They aren't worn and there is no visible cracking but I'm thinking that their time has come. I'm a pretty placid driver. I live in Devon, SW UK, so the car is more usually to be found pottering around the countryside than thrashing its way up and down the motorways. I do take it to Le Mans every year but that's not a long drive from here and I seldom take it much over 70 and, normally, I'm at 60 to 65. So...I'm looking at the Vredstein T-trac 2. It seems to be one of the better middle priced tyres. I do note reviews saying that it's "a good tyre for smaller cars". Not quite sure what that's implying nor what defines a "small" car. Weight, I suppose. So, what's the accumulated wisdom on these Vredsteins? Thank you. Simon -------------- next part -------------- An HTML attachment was scrubbed... URL: From airtightproductions at mac.com Wed Nov 4 08:50:10 2026 From: airtightproductions at mac.com (Steven Kingsbury) Date: Wed, 4 Nov 2026 15:50:10 +0000 (GMT) Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> Message-ID: <56a69def-eb61-49b4-91b9-397b36cc2794@me.com> I have them on my BN1, and I had them on my other BN1 which I lost in a fire. Both cars performed really well with them and I like them. They look good and hold the road well. Most of the time, I drive like you, nice and easy, but with my present BN1, I have been known to drive a bit "spirited" and they feel really good under the car. My car has had a bunch of M mods, bigger carbs, cam, higher compression, and on the road I can keep up with a 3000 with no problem, so my spirited driving is quite fun. Bottom line, I like them and they have served me well. Steven Kingsbury '55 BN1 On Nov 4, 2026, at 7:17 AM, Simon Lachlan via Healeys wrote: Sorry to wake this topic up again??.. My 3000?s tyres are 14 yrs old. They aren?t worn and there is no visible cracking but I?m thinking that their time has come. I?m a pretty placid driver. I live in Devon, SW UK, so the car is more usually to be found pottering around the countryside than thrashing its way up and down the motorways. I do take it to Le Mans every year but that?s not a long drive from here and I seldom take it much over 70 and, normally, I?m at 60 to 65. So???I?m looking at the Vredstein T-trac 2. It seems to be one of the better middle priced tyres. I do note reviews saying that it?s ?a good tyre for smaller cars?. Not quite sure what that?s implying nor what defines a ?small? car. Weight, I suppose. So, what?s the accumulated wisdom on these Vredsteins? Thank you. Simon _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/airtightproductions at icloud.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Wed Nov 4 09:54:34 2026 From: bspidell at comcast.net (Bob Spidell) Date: Wed, 4 Nov 2026 08:54:34 -0800 Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> Message-ID: <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> I have no experience with them, but I've had years with V. Sprint Classics. I'd be interested in a comparison; offhand, the tread looks more modern on the T-Tracs. On 11/4/2026 6:59 AM, Simon Lachlan via Healeys wrote: > > Sorry towake this topic up again??.. > > My 3000?s tyres are14 yrs old. They aren?t worn and there is no > visible cracking butI?m thinking that their time has come. > > I?m a pretty placid driver. Ilive in Devon, SW UK,so the car > ismoreusually to be found pottering around the countrysidethan > thrashing its way up and down the motorways. I do take it to Le Mans > every year but that?s nota long drive from here and I seldom take it > much over 70 and, normally, I?m at 60 to 65. > > So???I?mlooking at the Vredstein T-trac 2. It seems to be one of the > bettermiddle priced tyres. I do note reviews saying that it?s ?a good > tyre for smaller cars?. Not quite sure what that?s implying nor what > defines a ?small? car. Weight,I suppose. > > So, what?s theaccumulated wisdom on these Vredsteins? Thank you. > > Simon > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From manifold at telus.net Wed Nov 4 10:46:29 2026 From: manifold at telus.net (Harold Manifold) Date: Wed, 4 Nov 2026 10:46:29 -0700 Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> Message-ID: Hi, Tires are always a controversial subject, as every option has its pros and cons. That said, the tire closest in size to the original 5.90-15 Road Speed RS5 is the Michelin XAS 180HR15. These will fit any rim between 4.5" and 5.5" wide, and they fill the wheel wells for a much better look than a 165 or a low-profile tire. Best regards, Harold On Wed, Nov 4, 2026 at 10:02?AM Bob Spidell via Healeys < healeys at autox.team.net> wrote: > I have no experience with them, but I've had years with V. Sprint > Classics. I'd be interested in a comparison; offhand, the tread looks more > modern on the T-Tracs. > > On 11/4/2026 6:59 AM, Simon Lachlan via Healeys wrote: > > Sorry to wake this topic up again??.. > > My 3000?s tyres are 14 yrs old. They aren?t worn and there is no visible > cracking but I?m thinking that their time has come. > > I?m a pretty placid driver. I live in Devon, SW UK, so the car is more usually > to be found pottering around the countryside than thrashing its way up > and down the motorways. I do take it to Le Mans every year but that?s not a > long drive from here and I seldom take it much over 70 and, normally, I?m > at 60 to 65. > > So???I?m looking at the Vredstein T-trac 2. It seems to be one of the > better middle priced tyres. I do note reviews saying that it?s ?a good > tyre for smaller cars?. Not quite sure what that?s implying nor what > defines a ?small? car. Weight, I suppose. > > So, what?s the accumulated wisdom on these Vredsteins? Thank you. > > Simon > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/healeys > http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/manifold at telus.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmarkovich at aol.com Wed Nov 4 11:08:18 2026 From: rmarkovich at aol.com (Robert Markovich) Date: Wed, 4 Nov 2026 18:08:18 +0000 (UTC) Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> Message-ID: <1950640797.1855644.1793815698922@mail.yahoo.com> I too have had good luck with the Sprint Clasdics, which grip decently, at least on dry roads. A more modern tread design would probably improve wet grip for those rarer occasions when we get caught in the rain. The key will be if they kept the vintage sidewall look that helps make the Sprints?so appealing ? Sent from the all new AOL app for iOS On Wednesday, November 4, 2026, 12:46 PM, Bob Spidell via Healeys wrote: I have no experience with them, but I've had years with V. Sprint Classics. I'd be interested in a comparison; offhand, the tread looks more modern on the T-Tracs. On 11/4/2026 6:59 AM, Simon Lachlan via Healeys wrote: Sorry to wake this topic up again??.. My 3000?s tyres are 14 yrs old. They aren?t worn and there is no visible cracking but I?m thinking that their time has come. I?m a pretty placid driver. I live in Devon, SW UK, so the car is more usually to be found pottering around the countryside than thrashing its way up and down the motorways. I do take it to Le Mans every year but that?s not a long drive from here and I seldom take it much over 70 and, normally, I?m at 60 to 65. So???I?m looking at the Vredstein T-trac 2. It seems to be one of the better middle priced tyres. I do note reviews saying that it?s ?a good tyre for smaller cars?. Not quite sure what that?s implying nor what defines a ?small? car. Weight, I suppose. So, what?s the accumulated wisdom on these Vredsteins? Thank you. Simon _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rmarkovich at aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at alexarevel.plus.com Wed Nov 4 12:28:54 2026 From: simon.lachlan at alexarevel.plus.com (simon.lachlan at alexarevel.plus.com) Date: Wed, 4 Nov 2026 19:28:54 -0000 Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <1950640797.1855644.1793815698922@mail.yahoo.com> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> <707099c9-a6f1-4974-87e1-c4ed05e15b04@comcast.net> <1950640797.1855644.1793815698922@mail.yahoo.com> Message-ID: <004d01dd6c92$bb075d70$31161850$@alexarevel.plus.com> All good info and advice so far, for which many thanks. It?s worth considering that:- I?m not at all concerned with the appearance of the tyres as I, for one, have never studied that topic sufficiently to be able to differentiate. I don?t need to pay for a tyre that?s capable of doing things that I won?t require. A set of Michelin XAS will almost certainly last longer than I will. They are very pricey and I expect that one gets what one?s paid for. But they seem a little OTT for my requirements. Still thinking about the T-tracs, Simon From: Healeys On Behalf Of Robert Markovich via Healeys Sent: 04 November 2026 18:08 To: Bob Spidell ; healeys at autox.team.net Subject: Re: [Healeys] Vredstein T-trac 2 I too have had good luck with the Sprint Clasdics, which grip decently, at least on dry roads. A more modern tread design would probably improve wet grip for those rarer occasions when we get caught in the rain. The key will be if they kept the vintage sidewall look that helps make the Sprints so appealing ? Sent from the all new AOL app for iOS On Wednesday, November 4, 2026, 12:46 PM, Bob Spidell via Healeys > wrote: I have no experience with them, but I've had years with V. Sprint Classics. I'd be interested in a comparison; offhand, the tread looks more modern on the T-Tracs. On 11/4/2026 6:59 AM, Simon Lachlan via Healeys wrote: Sorry to wake this topic up again??.. My 3000?s tyres are 14 yrs old. They aren?t worn and there is no visible cracking but I?m thinking that their time has come. I?m a pretty placid driver. I live in Devon, SW UK, so the car is more usually to be found pottering around the countryside than thrashing its way up and down the motorways. I do take it to Le Mans every year but that?s not a long drive from here and I seldom take it much over 70 and, normally, I?m at 60 to 65. So???I?m looking at the Vredstein T-trac 2. It seems to be one of the better middle priced tyres. I do note reviews saying that it?s ?a good tyre for smaller cars?. Not quite sure what that?s implying nor what defines a ?small? car. Weight, I suppose. So, what?s the accumulated wisdom on these Vredsteins? Thank you. Simon _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rmarkovich at aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Wed Nov 4 14:37:44 2026 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Wed, 4 Nov 2026 21:37:44 +0000 Subject: [Healeys] Vredstein T-trac 2 In-Reply-To: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> References: <000001dd6c6d$32d15e80$98741b80$@alexarevel.plus.com> Message-ID: Simon, Since you are in the UK, have you taken a look at the Blokley tyres offered by MWS, I too have the Vredestein Sprint Classic, they are my third set I install and like them for the same type of driving as you do, but the Blockley are quite impressive as well and noted that many UK cars have them on. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Simon Lachlan via Healeys Sent: Wednesday, 04 November 2026 09:59:55 To: 'Healey List' Subject: [Healeys] Vredstein T-trac 2 Sorry to wake this topic up again??.. My 3000?s tyres are 14 yrs old. They aren?t worn and there is no visible cracking but I?m thinking that their time has come. I?m a pretty placid driver. I live in Devon, SW UK, so the car is more usually to be found pottering around the countryside than thrashing its way up and down the motorways. I do take it to Le Mans every year but that?s not a long drive from here and I seldom take it much over 70 and, normally, I?m at 60 to 65. So???I?m looking at the Vredstein T-trac 2. It seems to be one of the better middle priced tyres. I do note reviews saying that it?s ?a good tyre for smaller cars?. Not quite sure what that?s implying nor what defines a ?small? car. Weight, I suppose. So, what?s the accumulated wisdom on these Vredsteins? Thank you. Simon -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at alexarevel.plus.com Sat Nov 7 04:55:32 2026 From: simon.lachlan at alexarevel.plus.com (simon.lachlan at alexarevel.plus.com) Date: Sat, 7 Nov 2026 11:55:32 -0000 Subject: [Healeys] Vredsteins Message-ID: <001b01dd6eae$e4e439b0$aeacad10$@alexarevel.plus.com> Thank you for the replies. There wasn't a consensus, but we didn't expect one. Blockleys came out strong for value but Blockley and MWS put up so many inconvenient obstacles that I gave up with them. I found that Black Circles sold and delivered the Vredsteins at a very good price. They are going to a local garage, 200 yds away. The guy there has been fixing classics forever and he'll fit, balance etcetc. Just thought I'd bring the question to a conclusion. Simon -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at bradakis.com Sat Nov 7 12:17:21 2026 From: mark at bradakis.com (Mark Bradakis) Date: Sat, 7 Nov 2026 12:17:21 -0700 Subject: [Healeys] Nice car! Message-ID: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> I wonder what the reserve on this was? Looks like a very nice car. https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 mjb. From alfuller194 at gmail.com Sun Nov 8 12:33:11 2026 From: alfuller194 at gmail.com (Al Fuller) Date: Sun, 8 Nov 2026 11:33:11 -0800 Subject: [Healeys] Nice car! In-Reply-To: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: Yes, interesting. The bidding stopped at $42,000 while the seller says the deceased owner put between $86-100,000 into refurbishing it. I suspect the reserve would have been around what he put into that work. ________________ Sent from my phone Best Regards, Al Fuller On Sat, Nov 7, 2026, 11:35?AM Mark Bradakis via Healeys < healeys at autox.team.net> wrote: > > I wonder what the reserve on this was? Looks like a very nice car. > > https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 > > > mjb. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/healeys > http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/alfuller194 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Sun Nov 8 17:29:20 2026 From: healeybruce at roadrunner.com (healeybruce at roadrunner.com) Date: Sun, 8 Nov 2026 16:29:20 -0800 Subject: [Healeys] Nice car! In-Reply-To: References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: <004101dd6fe1$5dd8b1b0$198a1510$@roadrunner.com> Agreed. The market continues to be soft for Healeys. The decision to paint the substructure white instead of black is interesting. I don?t recall seeing this car at any So Cal events. Bruce Steele 1960 BN7 From: Healeys On Behalf Of Al Fuller Sent: Sunday, November 8, 2026 11:33 AM To: Mark Bradakis Cc: AH Mail List Subject: Re: [Healeys] Nice car! Yes, interesting. The bidding stopped at $42,000 while the seller says the deceased owner put between $86-100,000 into refurbishing it. I suspect the reserve would have been around what he put into that work. ________________ Sent from my phone Best Regards, Al Fuller On Sat, Nov 7, 2026, 11:35?AM Mark Bradakis via Healeys > wrote: I wonder what the reserve on this was? Looks like a very nice car. https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 mjb. _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/alfuller194 at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmarkovich at aol.com Mon Nov 9 07:00:23 2026 From: rmarkovich at aol.com (Robert Markovich) Date: Mon, 9 Nov 2026 14:00:23 +0000 (UTC) Subject: [Healeys] Nice car! In-Reply-To: References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: <1576854963.1071774.1794232823315@mail.yahoo.com> The simple truth, at least for now, is that prices are down for most vintage British cars and are even beginning to slip for the seemingly endless ascent of American muscle. Even truly special Healeys like the 100S and DMH?factory 100M are way off their peak. And decent?Sunbeam Tigers are now available for $50k or even less. Aging demographics? Perhaps, though sensible reliability upgrades make our cars more appealing to younger buyers as well.?I?m on my third Healey?a BN7 after having owned a BN6 and early BN1. I?ll enjoy it as I did the other two, and doubtless lose money on it if I ever sell it (as I did on the others). But I drive my cars and love them, which is the point. So for like-minded enthusiasts, this is a great time to buy!? Sent from the all new AOL app for iOS On Sunday, November 8, 2026, 9:55 PM, Al Fuller wrote: Yes, interesting. The bidding stopped at $42,000 while the seller says the deceased owner put between $86-100,000 into refurbishing it. I suspect the reserve would have been around what he put into that work. ________________ Sent from my phone Best Regards, Al Fuller On Sat, Nov 7, 2026, 11:35?AM Mark Bradakis via Healeys wrote: I wonder what the reserve on this was?? Looks like a very nice car. https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 mjb. _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/alfuller194 at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rmarkovich at aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From s.hutchings at rogers.com Mon Nov 9 07:20:13 2026 From: s.hutchings at rogers.com (Stephen Hutchings) Date: Mon, 9 Nov 2026 09:20:13 -0500 Subject: [Healeys] Nice car! In-Reply-To: <004101dd6fe1$5dd8b1b0$198a1510$@roadrunner.com> References: <004101dd6fe1$5dd8b1b0$198a1510$@roadrunner.com> Message-ID: An HTML attachment was scrubbed... URL: From bspidell at comcast.net Mon Nov 9 09:25:45 2026 From: bspidell at comcast.net (Bob Spidell) Date: Mon, 9 Nov 2026 08:25:45 -0800 Subject: [Healeys] Nice car! In-Reply-To: References: <004101dd6fe1$5dd8b1b0$198a1510$@roadrunner.com> Message-ID: <329d2b91-84dc-41bf-85fb-50077382a247@comcast.net> Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: > What spoils a lot of otherwise nice cars for me is the line at the > bottom of the front fender/wing. The line should have a subtle curve > to it, but so many restorers have straightened out that line so it > loses it curve. Even the Healey 3000 in the heritage museum at Gaydon > has this problem. I guess it?s a lot easier to ignore the curve when > repairing the rot at the bottom of the fender?but the replacements > from AH spares and others do have the correct line. > > Stephen, BJ8 > > Sent from my iPad > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gradea1 at charter.net Mon Nov 9 15:14:22 2026 From: gradea1 at charter.net (Hank Leach) Date: Mon, 09 Nov 2026 22:14:22 +0000 Subject: [Healeys] Nice car! Message-ID: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Mon Nov 9 18:47:31 2026 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 10 Nov 2026 01:47:31 +0000 Subject: [Healeys] Nice car! In-Reply-To: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> Message-ID: Now at $50000.00. Everything happens in the last couple of hours. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car! Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line. Stephen, BJ8 Sent from my iPad -------------- next part -------------- An HTML attachment was scrubbed... URL: From rchaskell at earthlink.net Tue Nov 10 06:29:29 2026 From: rchaskell at earthlink.net (Bob Haskell) Date: Tue, 10 Nov 2026 08:29:29 -0500 Subject: [Healeys] Nice car! In-Reply-To: References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> Message-ID: <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> BAT - 276 auctions closing today.? Their daily email didn't show 111 of them. Bob Haskell Austin-Healey 3000 roadster registrar On 11/9/26 20:47, Jean Caron wrote: > Now at $50000.00. Everything happens in the last couple of hours. > > Jean > > Sent from my Bell Samsung device over Canada?s largest network. > ------------------------------------------------------------------------ > *From:* Healeys on behalf of Hank > Leach > *Sent:* Monday, 09 November 2026 17:14:22 > *To:* healeys at autox.team.net ; Bob Spidell > > *Subject:* Re: [Healeys] Nice car! > Great comments and spot on. I have been watching BAT and lately we > have had a few good sales. It will be interesting to see what happens > to the *no reserve-for charity! *100M that is currently about > $35K-whats that about? Hank > -------------------- > > From: "Bob Spidell via Healeys" > Reply-To: "Bob Spidell" > To: > Sent: November 9, 2026 at 8:41 AM PST > Subject: Re: [Healeys] Nice car! > Wholly agree. First thing I look for in a side shot is the slight > curve of the bottom rockers; when we restored my BN2 I ordered from > Kilmartin because their parts were faithful to the original curve. > Another thing that gives a resto away is the wire bead inside the rear > wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got > aftermarket panels that didn't have the bead. I bought them later but > haven't felt compelled enough to redo them (plus, I haven't figured > out how the meld the existing bead with the replacement bead). > > It's a common fallacy of owners of restored cars that their car is > 'worth' what they've put into it, both in dollars and hours. The car > is worth what the market will offer, period. I also feel a resto of a > Healey is more difficult than the shiny 'restomods' you see on B-J and > other auctions. Healeys are a semi-monocoque (unibody) build;? muscle > cars are usually body-on-frame, which is a simpler build (also, parts > are more available, from Summit and others). > > Bob > > > > On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: > > What spoils a lot of otherwise nice cars for me is the line at the > bottom of the front fender/wing. The line should have a subtle > curve to it, but so many restorers have straightened out that line > so it loses it curve. Even the Healey 3000 in the heritage museum > at Gaydon has this problem. I guess it?s a lot easier to ignore > the curve when repairing the rot at the bottom of the fender?but > the replacements from AH spares and others do have the correct line. > Stephen, BJ8 > > Sent from my iPad > > > _______________________________________________ > Support Team.Nethttp://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive:http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Nov 10 12:48:26 2026 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 10 Nov 2026 11:48:26 -0800 Subject: [Healeys] Nice car! In-Reply-To: References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> Message-ID: CAD$177,000 (USD$125,000). I wonder if the car will stay in Canada? Car is Concours Gold, but has front disk brakes; no deduction? Car can certainly benefit from that upgrade. Bob On 11/9/2026 5:47 PM, Jean Caron wrote: > Now at $50000.00. Everything happens in the last couple of hours. > > Jean > > Sent from my Bell Samsung device over Canada?s largest network. > ------------------------------------------------------------------------ > *From:* Healeys on behalf of Hank > Leach > *Sent:* Monday, 09 November 2026 17:14:22 > *To:* healeys at autox.team.net ; Bob Spidell > > *Subject:* Re: [Healeys] Nice car! > Great comments and spot on. I have been watching BAT and lately we > have had a few good sales. It will be interesting to see what happens > to the *no reserve-for charity! *100M that is currently about > $35K-whats that about? Hank > -------------------- > > From: "Bob Spidell via Healeys" > Reply-To: "Bob Spidell" > To: > Sent: November 9, 2026 at 8:41 AM PST > Subject: Re: [Healeys] Nice car! > Wholly agree. First thing I look for in a side shot is the slight > curve of the bottom rockers; when we restored my BN2 I ordered from > Kilmartin because their parts were faithful to the original curve. > Another thing that gives a resto away is the wire bead inside the rear > wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got > aftermarket panels that didn't have the bead. I bought them later but > haven't felt compelled enough to redo them (plus, I haven't figured > out how the meld the existing bead with the replacement bead). > > It's a common fallacy of owners of restored cars that their car is > 'worth' what they've put into it, both in dollars and hours. The car > is worth what the market will offer, period. I also feel a resto of a > Healey is more difficult than the shiny 'restomods' you see on B-J and > other auctions. Healeys are a semi-monocoque (unibody) build;? muscle > cars are usually body-on-frame, which is a simpler build (also, parts > are more available, from Summit and others). > > Bob > > > > On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: > > What spoils a lot of otherwise nice cars for me is the line at the > bottom of the front fender/wing. The line should have a subtle > curve to it, but so many restorers have straightened out that line > so it loses it curve. Even the Healey 3000 in the heritage museum > at Gaydon has this problem. I guess it?s a lot easier to ignore > the curve when repairing the rot at the bottom of the fender?but > the replacements from AH spares and others do have the correct line. > Stephen, BJ8 > > Sent from my iPad > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Tue Nov 10 13:29:57 2026 From: michael.salter at gmail.com (michael.salter at gmail.com) Date: Tue, 10 Nov 2026 15:29:57 -0500 Subject: [Healeys] Nice car! In-Reply-To: <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> Message-ID: <000001dd7152$417a6460$c46f2d20$@gmail.com> ?(plus, I haven't figured out how the meld the existing bead with the replacement bead)?. Doing that correctly takes some skill ! We used to remove the sheet metal but leave the wire then form a new bead over the original wire. Once the wire has been cut you are faced with a very difficult challenge to produce a joint that won?t crack. M From: Healeys On Behalf Of Bob Haskell Sent: Tuesday, November 10, 2026 8:29 AM To: Jean Caron ; gradea1 at charter.net; healeys at autox.team.net; Bob Spidell Subject: Re: [Healeys] Nice car! BAT - 276 auctions closing today. Their daily email didn't show 111 of them. Bob Haskell Austin-Healey 3000 roadster registrar On 11/9/26 20:47, Jean Caron wrote: Now at $50000.00. Everything happens in the last couple of hours. Jean Sent from my Bell Samsung device over Canada?s largest network. _____ From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car! Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line. Stephen, BJ8 Sent from my iPad _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From gradea1 at charter.net Tue Nov 10 13:47:46 2026 From: gradea1 at charter.net (Hank Leach) Date: Tue, 10 Nov 2026 20:47:46 +0000 Subject: [Healeys] Nice car! Message-ID: An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Tue Nov 10 14:33:29 2026 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 10 Nov 2026 21:33:29 +0000 Subject: [Healeys] Nice car! In-Reply-To: <000001dd7152$417a6460$c46f2d20$@gmail.com> References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> <000001dd7152$417a6460$c46f2d20$@gmail.com> Message-ID: The best way to obtain good results with folding the metal over your bead is to figure out the diameter of your bead and then multiply that number by 2.5 to have the necessary amount of sheet metal to fold over. Once you have that, butt weld your new bead to the old one, clean your weld and fold the metal over. That has worked for me for many years now. Jean ________________________________ From: michael.salter at gmail.com Sent: November 10, 2026 8:29 PM To: 'Bob Haskell' ; 'Jean Caron' ; gradea1 at charter.net ; healeys at autox.team.net ; 'Bob Spidell' Subject: RE: [Healeys] Nice car! ?(plus, I haven't figured out how the meld the existing bead with the replacement bead)?. Doing that correctly takes some skill ! We used to remove the sheet metal but leave the wire then form a new bead over the original wire. Once the wire has been cut you are faced with a very difficult challenge to produce a joint that won?t crack. M From: Healeys On Behalf Of Bob Haskell Sent: Tuesday, November 10, 2026 8:29 AM To: Jean Caron ; gradea1 at charter.net; healeys at autox.team.net; Bob Spidell Subject: Re: [Healeys] Nice car! BAT - 276 auctions closing today. Their daily email didn't show 111 of them. Bob Haskell Austin-Healey 3000 roadster registrar On 11/9/26 20:47, Jean Caron wrote: Now at $50000.00. Everything happens in the last couple of hours. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car! Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line. Stephen, BJ8 Sent from my iPad _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From gradea1 at charter.net Tue Nov 10 17:39:15 2026 From: gradea1 at charter.net (Hank Leach) Date: Wed, 11 Nov 2026 00:39:15 +0000 Subject: [Healeys] Nice car! Message-ID: <1f8ef760-46b7-16ef-4178-4ef432b5662e@charter.net> An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Nov 10 21:42:11 2026 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 10 Nov 2026 20:42:11 -0800 Subject: [Healeys] Nice car! In-Reply-To: References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> <000001dd7152$417a6460$c46f2d20$@gmail.com> Message-ID: Thanks Jean and Michael. Is it advisable to heat the sheet metal to facilitate folding/wrapping, or does it warp or damage nearby metal too much? Bob On 11/10/2026 1:33 PM, Jean Caron wrote: > The best way to obtain good results with folding the metal over your > bead is to figure out the diameter of your bead and then multiply that > number by 2.5 to have the necessary amount of sheet metal to fold > over. Once you have that, butt weld your new bead to the old one, > clean your weld and fold the metal over. That has worked for me for > many years now. > > Jean > ------------------------------------------------------------------------ > *From:* michael.salter at gmail.com > *Sent:* November 10, 2026 8:29 PM > *To:* 'Bob Haskell' ; 'Jean Caron' > ; gradea1 at charter.net > ; healeys at autox.team.net > ; 'Bob Spidell' > *Subject:* RE: [Healeys] Nice car! > > ?(plus, I haven't figured out how the meld the existing bead with the > replacement bead)?. > > Doing that correctly takes some skill ! We used to remove the sheet > metal but leave the wire then form a new bead over the original wire. > > Once the wire has been cut you are faced with a very difficult > challenge to produce a joint that won?t crack. > > M > > *From:*Healeys *On Behalf Of *Bob Haskell > *Sent:* Tuesday, November 10, 2026 8:29 AM > *To:* Jean Caron ; > gradea1 at charter.net; healeys at autox.team.net; Bob Spidell > > *Subject:* Re: [Healeys] Nice car! > > BAT - 276 auctions closing today.? Their daily email didn't show 111 > of them. > > Bob Haskell > Austin-Healey 3000 roadster registrar > > On 11/9/26 20:47, Jean Caron wrote: > > Now at $50000.00. Everything happens in the last couple of hours. > > Jean > > Sent from my Bell Samsung device over Canada?s largest network. > > ------------------------------------------------------------------------ > > *From:*Healeys > on behalf of Hank Leach > > *Sent:* Monday, 09 November 2026 17:14:22 > *To:* healeys at autox.team.net > ; Bob Spidell > > *Subject:* Re: [Healeys] Nice car! > > Great comments and spot on. I have been watching BAT and lately we > have had a few good sales. It will be interesting to see what > happens to the *no reserve-for charity! *100M that is currently > about $35K-whats that about? Hank > -------------------- > > From: "Bob Spidell via Healeys" > > Reply-To: "Bob Spidell" > > To: > Sent: November 9, 2026 at 8:41 AM PST > Subject: Re: [Healeys] Nice car! > Wholly agree. First thing I look for in a side shot is the slight > curve of the bottom rockers; when we restored my BN2 I ordered > from Kilmartin because their parts were faithful to the original > curve. Another thing that gives a resto away is the wire bead > inside the rear wing edges; unfortunately, when I replaced the > doglegs on my BJ8 I got aftermarket panels that didn't have the > bead. I bought them later but haven't felt compelled enough to > redo them (plus, I haven't figured out how the meld the existing > bead with the replacement bead). > > It's a common fallacy of owners of restored cars that their car is > 'worth' what they've put into it, both in dollars and hours. The > car is worth what the market will offer, period. I also feel a > resto of a Healey is more difficult than the shiny 'restomods' you > see on B-J and other auctions. Healeys are a semi-monocoque > (unibody) build;? muscle cars are usually body-on-frame, which is > a simpler build (also, parts are more available, from Summit and > others). > > Bob > > On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: > > What spoils a lot of otherwise nice cars for me is the line at > the bottom of the front fender/wing. The line should have a > subtle curve to it, but so many restorers have straightened > out that line so it loses it curve. Even the Healey 3000 in > the heritage museum at Gaydon has this problem. I guess it?s a > lot easier to ignore the curve when repairing the rot at the > bottom of the fender?but the replacements from AH spares and > others do have the correct line. > > Stephen, BJ8 > > Sent from my iPad > > > > _______________________________________________ > > Support Team.Nethttp://www.team.net/donate.html > > Suggested annual donation? $12.75 > > > > Archive:http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Tue Nov 10 21:56:35 2026 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Wed, 11 Nov 2026 04:56:35 +0000 Subject: [Healeys] Nice car! In-Reply-To: References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> <000001dd7152$417a6460$c46f2d20$@gmail.com> Message-ID: I have always done it cold, using the lightest Snap-On flat body hammer I have, small blows but lots of them doing it in small increments at a time always produce the best results. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Bob Spidell Sent: Tuesday, 10 November 2026 23:42:11 To: Jean Caron ; michael.salter at gmail.com ; 'Bob Haskell' ; gradea1 at charter.net ; healeys at autox.team.net Subject: Re: [Healeys] Nice car! Thanks Jean and Michael. Is it advisable to heat the sheet metal to facilitate folding/wrapping, or does it warp or damage nearby metal too much? Bob On 11/10/2026 1:33 PM, Jean Caron wrote: The best way to obtain good results with folding the metal over your bead is to figure out the diameter of your bead and then multiply that number by 2.5 to have the necessary amount of sheet metal to fold over. Once you have that, butt weld your new bead to the old one, clean your weld and fold the metal over. That has worked for me for many years now. Jean ________________________________ From: michael.salter at gmail.com Sent: November 10, 2026 8:29 PM To: 'Bob Haskell' ; 'Jean Caron' ; gradea1 at charter.net ; healeys at autox.team.net ; 'Bob Spidell' Subject: RE: [Healeys] Nice car! ?(plus, I haven't figured out how the meld the existing bead with the replacement bead)?. Doing that correctly takes some skill ! We used to remove the sheet metal but leave the wire then form a new bead over the original wire. Once the wire has been cut you are faced with a very difficult challenge to produce a joint that won?t crack. M From: Healeys On Behalf Of Bob Haskell Sent: Tuesday, November 10, 2026 8:29 AM To: Jean Caron ; gradea1 at charter.net; healeys at autox.team.net; Bob Spidell Subject: Re: [Healeys] Nice car! BAT - 276 auctions closing today. Their daily email didn't show 111 of them. Bob Haskell Austin-Healey 3000 roadster registrar On 11/9/26 20:47, Jean Caron wrote: Now at $50000.00. Everything happens in the last couple of hours. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car! Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line. Stephen, BJ8 Sent from my iPad _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Wed Nov 11 04:51:42 2026 From: michael.salter at gmail.com (Michael Salter) Date: Wed, 11 Nov 2026 11:51:42 +0000 Subject: [Healeys] Nice car! In-Reply-To: References: <1c610429-89f2-3257-97c6-0e94a81014a2@charter.net> <9adbab2e-8811-4a7b-bb4a-e9ec5c290415@earthlink.net> <000001dd7152$417a6460$c46f2d20$@gmail.com> Message-ID: Yes, cold, exactly as Jean describes. M ________________________________ From: Jean Caron Sent: Tuesday, 10 November 2026 23:56:35 To: Bob Spidell ; michael.salter at gmail.com ; 'Bob Haskell' ; gradea1 at charter.net ; healeys at autox.team.net Subject: Re: [Healeys] Nice car! I have always done it cold, using the lightest Snap-On flat body hammer I have, small blows but lots of them doing it in small increments at a time always produce the best results. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Bob Spidell Sent: Tuesday, 10 November 2026 23:42:11 To: Jean Caron ; michael.salter at gmail.com ; 'Bob Haskell' ; gradea1 at charter.net ; healeys at autox.team.net Subject: Re: [Healeys] Nice car! Thanks Jean and Michael. Is it advisable to heat the sheet metal to facilitate folding/wrapping, or does it warp or damage nearby metal too much? Bob On 11/10/2026 1:33 PM, Jean Caron wrote: The best way to obtain good results with folding the metal over your bead is to figure out the diameter of your bead and then multiply that number by 2.5 to have the necessary amount of sheet metal to fold over. Once you have that, butt weld your new bead to the old one, clean your weld and fold the metal over. That has worked for me for many years now. Jean ________________________________ From: michael.salter at gmail.com Sent: November 10, 2026 8:29 PM To: 'Bob Haskell' ; 'Jean Caron' ; gradea1 at charter.net ; healeys at autox.team.net ; 'Bob Spidell' Subject: RE: [Healeys] Nice car! ?(plus, I haven't figured out how the meld the existing bead with the replacement bead)?. Doing that correctly takes some skill ! We used to remove the sheet metal but leave the wire then form a new bead over the original wire. Once the wire has been cut you are faced with a very difficult challenge to produce a joint that won?t crack. M From: Healeys On Behalf Of Bob Haskell Sent: Tuesday, November 10, 2026 8:29 AM To: Jean Caron ; gradea1 at charter.net; healeys at autox.team.net; Bob Spidell Subject: Re: [Healeys] Nice car! BAT - 276 auctions closing today. Their daily email didn't show 111 of them. Bob Haskell Austin-Healey 3000 roadster registrar On 11/9/26 20:47, Jean Caron wrote: Now at $50000.00. Everything happens in the last couple of hours. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car! Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build; muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others). Bob On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line. Stephen, BJ8 Sent from my iPad _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmarkovich at aol.com Wed Nov 11 11:18:23 2026 From: rmarkovich at aol.com (Robert Markovich) Date: Wed, 11 Nov 2026 18:18:23 +0000 (UTC) Subject: [Healeys] Nice car! In-Reply-To: <1f8ef760-46b7-16ef-4178-4ef432b5662e@charter.net> References: <1f8ef760-46b7-16ef-4178-4ef432b5662e@charter.net> Message-ID: <1269608325.1824549.1794421103164@mail.yahoo.com> Everything Hank notes is correct. I?m on my third Healey. An early BN7, which of course came with front discs, but I had added them on the 100 BN1 and 100/6 BN6 I owned before this one. I used late BJ8 front discs and spindles on the 100, which feature larger calipers. An added note: Donald and son Geoff apparently regretted using the expensive and complex Dunlop disc system on the 100S (also used on a handful of 100/6s probably to use up leftover stock) vs the simpler and effective Girling system on all 3000s.? Sent from the all new AOL app for iOS On Tuesday, November 10, 2026, 9:41 PM, Hank Leach wrote: Hi Randy- I was being facetious when I said "option" and put it in quotes-found only on the 100S but you could buy a set and replace drums. Here is AIs answer which is actually correct:No, disc brakes were not offered as a factory option on standard Austin-Healey 100/4 BN2 models. [1, 2] - Standard Brakes: BN2 models came equipped with drum brakes on all four wheels from the factory. [1] Factory Disc Brakes (100S): The ultra-rare, racing-focused Austin-Healey 100S featured Dunlop disc brakes on all four wheels, but this was a dedicated specialty model (only 50 production cars built) rather than an optional feature on a standard BN2. [1, 2]Aftermarket Conversions: While disc brakes did not come as a factory option for the BN2, disc brake conversion kits are widely available and commonly installed by owners today to upgrade stopping performance.??I think, as you said, the current owner added them after it was judged... to get better stopping power? Winning bidder sure got a good deal. No so much to bolster Healey values though. Regards, Hank -------------------- From: "Randy Hicks" To: Sent: November 10, 2026 at 2:00 PM PST Subject: Re: [Healeys] Nice car! ?Hank, unfortunately I?m in AZ for a couple months and don?t have my Healey reference material with me.?Were disc brakes offered as an option on BN2?s? I don?t recall that. But then again there is a lot I don?t recall!!! ??When I saw it had disc?s on the front I assumed they were added after the 2016 Concours Inspection. (I do have the judging cover sheet at home.)?Randy On Nov 10, 2026, at 2:41?PM, Hank Leach wrote: There is a 50 point spread on gold vs silver. Since disc brakes were an "option" maybe the deduction was not as aggressive along with other small deductions. Hank -------------------- From: "Bob Spidell" To: "Jean Caron" , , Sent: November 10, 2026 at 11:48 AM PST Subject: Re: [Healeys] Nice car! CAD$177,000 (USD$125,000). I wonder if the car will stay in Canada? Car is Concours Gold, but has front disk brakes; no deduction? Car can certainly benefit from that upgrade. Bob On 11/9/2026 5:47 PM, Jean Caron wrote: Now at $50000.00. Everything happens in the last couple of hours.?Jean?Sent from my Bell Samsung device over Canada?s largest network.From: Healeys on behalf of Hank Leach Sent: Monday, 09 November 2026 17:14:22 To: healeys at autox.team.net ; Bob Spidell Subject: Re: [Healeys] Nice car!?Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: Sent: November 9, 2026 at 8:41 AM PST Subject: Re: [Healeys] Nice car! Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead). It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build;? muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others).? Bob ? On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote: What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it?s a lot easier to ignore the curve when repairing the rot at the bottom of the fender?but the replacements from AH spares and others do have the correct line.?Stephen, BJ8 Sent from my iPad? ? ?_______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation ?$12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey100m at me.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rmarkovich at aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Wed Nov 11 15:45:14 2026 From: michael.salter at gmail.com (Michael Salter) Date: Wed, 11 Nov 2026 22:45:14 +0000 Subject: [Healeys] BN1 shift pattern t shirt Message-ID: Someone out in Healeyland sent me a pic of a t shirt with a BN1 shift pattern on it but I've forgotten who. Can anyone point me in the right direction? -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Wed Nov 11 16:16:11 2026 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Wed, 11 Nov 2026 23:16:11 +0000 Subject: [Healeys] BN1 shift pattern t shirt In-Reply-To: References: Message-ID: Michael, It is a T-shirt sold by the AHCUSA, go to www.healey.org click on Regalia and you will see it there. Jean Sent from my Bell Samsung device over Canada?s largest network. ________________________________ From: Healeys on behalf of Michael Salter Sent: Wednesday, 11 November 2026 17:45:14 To: healeys at autox.team.net Subject: [Healeys] BN1 shift pattern t shirt Someone out in Healeyland sent me a pic of a t shirt with a BN1 shift pattern on it but I've forgotten who. Can anyone point me in the right direction? -------------- next part -------------- An HTML attachment was scrubbed... URL: From gradea1 at charter.net Wed Nov 11 16:55:59 2026 From: gradea1 at charter.net (Hank Leach) Date: Wed, 11 Nov 2026 23:55:59 +0000 Subject: [Healeys] BN1 shift pattern t shirt Message-ID: <1e28b6b4-cf0e-e03b-3e77-a54b761d54d7@charter.net> An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Wed Nov 11 18:08:47 2026 From: michael.oritt at gmail.com (Michael Oritt) Date: Wed, 11 Nov 2026 20:08:47 -0500 Subject: [Healeys] BN1 shift pattern t shirt In-Reply-To: References: Message-ID: I wonder if they sell one for Smitty's five-speed conversions? Best--Michael Oritt -------------------------------- It is a T-shirt sold by the AHCUSA, go to www.healey.org click on Regalia and you will see it there. On Wed, Nov 11, 2026 at 7:49?PM Jean Caron < vintage_roadster_restoration at hotmail.com> wrote: > Michael, > It is a T-shirt sold by the AHCUSA, go to www.healey.org click on > Regalia and you will see it there. > > Jean > > Sent from my Bell Samsung device over Canada?s largest network. > ------------------------------ > *From:* Healeys on behalf of Michael > Salter > *Sent:* Wednesday, 11 November 2026 17:45:14 > *To:* healeys at autox.team.net > *Subject:* [Healeys] BN1 shift pattern t shirt > > Someone out in Healeyland sent me a pic of a t shirt with a BN1 shift > pattern on it but I've forgotten who. > Can anyone point me in the right direction? > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/healeys > http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/michael.oritt at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Nov 12 08:40:46 2026 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 12 Nov 2026 07:40:46 -0800 Subject: [Healeys] BN1 shift pattern t shirt In-Reply-To: References: Message-ID: <69a7eadf-a51f-42a8-870c-6ff40db07a5d@comcast.net> Not Healey, but this came through my FB feed: https://garageworn.com/products/manual-preservation-5-speed-heavyweight-tee On 11/11/2026 5:08 PM, Michael Oritt via Healeys wrote: > I wonder if they sell one for?Smitty's five-speed conversions? > > Best--Michael Oritt > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Nov 12 15:26:57 2026 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 12 Nov 2026 14:26:57 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) Message-ID: <61d322e8-fd8c-40d9-b5bf-32b4ff2944e3@comcast.net> I highly recommend: https://www.youtube.com/watch?v=7hvfmpJQvwA bs From michael.salter at gmail.com Fri Nov 13 08:22:09 2026 From: michael.salter at gmail.com (Michael Salter) Date: Fri, 13 Nov 2026 15:22:09 +0000 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <61d322e8-fd8c-40d9-b5bf-32b4ff2944e3@comcast.net> References: <61d322e8-fd8c-40d9-b5bf-32b4ff2944e3@comcast.net> Message-ID: Thanks Bob, one of the best researched articles on the subject that I have ever seen. ________________________________ From: Healeys on behalf of Bob Spidell via Healeys Sent: Thursday, 12 November 2026 17:26:57 To: Healeys Subject: [Healeys] The Story of Positive Earth (and Electrics 101) I highly recommend: https://www.youtube.com/watch?v=7hvfmpJQvwA bs _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Nov 13 09:21:18 2026 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 13 Nov 2026 08:21:18 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: References: <61d322e8-fd8c-40d9-b5bf-32b4ff2944e3@comcast.net> Message-ID: <0f6535d6-bc75-46d7-894a-85113458428a@comcast.net> YW Michael. Probably AI generated--I still wonder why we got an extended shot of an ice skater--but I couldn't find any discrepancies with what I know about the subject. Source has other videos--on magnetos, torsion bars, etc.--but I haven't watched them yet. bs On 11/13/2026 7:22 AM, Michael Salter wrote: > Thanks Bob, one of the best researched articles on the subject that I > have ever seen. > > > ------------------------------------------------------------------------ > *From:* Healeys on behalf of Bob > Spidell via Healeys > *Sent:* Thursday, 12 November 2026 17:26:57 > *To:* Healeys > *Subject:* [Healeys] The Story of Positive Earth (and Electrics 101) > I highly recommend: > > https://www.youtube.com/watch?v=7hvfmpJQvwA > > bs > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gradea1 at charter.net Fri Nov 13 10:54:07 2026 From: gradea1 at charter.net (Hank Leach) Date: Fri, 13 Nov 2026 17:54:07 +0000 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) Message-ID: <8d267537-75f7-e46d-5a69-5499fe52b618@charter.net> An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Nov 13 12:04:03 2026 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 13 Nov 2026 11:04:03 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <8d267537-75f7-e46d-5a69-5499fe52b618@charter.net> References: <8d267537-75f7-e46d-5a69-5499fe52b618@charter.net> Message-ID: <087860FA-2F80-42E4-B6E0-17F13BC96CAC@comcast.net> An HTML attachment was scrubbed... URL: From gradea1 at charter.net Fri Nov 13 20:34:19 2026 From: gradea1 at charter.net (Hank Leach) Date: Sat, 14 Nov 2026 03:34:19 +0000 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) Message-ID: <4686045d-9a3a-d733-9254-1217f13b84e3@charter.net> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Batteries hookup.JPG Type: image/jpeg Size: 276615 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_20261108_151228869_HDR.jpg Type: image/jpeg Size: 424473 bytes Desc: not available URL: From gradea1 at charter.net Sat Nov 14 10:56:31 2026 From: gradea1 at charter.net (Hank Leach) Date: Sat, 14 Nov 2026 17:56:31 +0000 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) Message-ID: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Sat Nov 14 11:52:59 2026 From: michael.salter at gmail.com (Michael Salter) Date: Sat, 14 Nov 2026 13:52:59 -0500 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> Message-ID: Interesting that you should bring this subject up Hank. I'm always on the lookout for a solution but, as yet not much has shown up. The primary issue is the "stalled" current draw of the M418 starter motor of around 450 amps. I have found a 12 volt battery which will fit into the case which delivers 225 amps. Tests on my BN1 with around 9.5: 1 compressions show that it can draw something like 280 amps on a cold day at first attempt with 20/50 oil. Once it has cranked over a few times this drops to under 200 amps. My BN2 with its standard 7.5:1 compressions only draws around 130 amps from cold. I'm working with a battery company at present who have a "power sports" battery which would fit into the original case which delivers 225 CCA so it's likely that that battery would work with the BN2 but, because it is fuel injected I'm still trying to figure out if that battery has sufficient reserve capacity to provide the 8 amps the EFI system requires for sufficient time at idle. BTW, not wanting to burst your bubble but I'm fairly sure now that the 17L cases suppied by Antique Battery actually weren't correct for a 100! I bought pair from Kent Lacy that were from the very low mileage car that he had and they are quite different. I understand that the A B cases were actually correct for an MGA. This is, I believe, what the original Lucas battery used in the 100 looked like. M ------------------------------ *From:* Hank Leach *Sent:* Saturday, 14 November 2026 12:56:31 *To:* simon.lachlan at alexarevel.plus.com *Cc:* michael.salter at gmail.com ; Healey team < healeys at autox.team.net> *Subject:* RE: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Simon-long story about batteries. The brief answer is they are originally Lucas style (licensed) made by Antique Battery in Pennsylvania. (now out of business) They were dry charged and about $300 each. They lasted about 3 years and spit acid all over my RE and axle as they gassed/vented. Finally, in desperation I went to one universal 12V on the passenger (here RT side) which fit the tray. Since they were so accurate in looks, I could not bring myself to throw them away so I took Michael Salter's advice and cut them open, discarding the plates, and that is how they now are; cleaned up but empty-0 volts. I had intended to try Michaels solution but he did not have good results with the underpowered and dangerous Lithium batteries, so I am still in search of a 12V. AGM (Lead/acid-sealed) unit small enough to fit inside the case. (like an ATV size) That would be a safer sealed battery. Not yet found one with enough CCA. In the meantime I am preparing the dummy side(LH) to be just a connection to ground, so that looking into the compartment, all looks sort of correct. There is a company on eBay, presently making one look-a-like 17L but without Lucas logo as they could not get Lucas to approve them-still costing $350 each and also dry charged old style spitting acid type. These I don't want. So as good as they look they are not currently functional in my 100. Sad story. Waiting for Michael to come up with a solution. Hope he finds something and then they can be POSITIVE GROUND. Hank -------------------- From: To: Sent: November 14, 2026 at 1:27 AM PST Subject: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Great pics. Batteries look new. For interest?s sake ? I have a BT7 ? are they repros or are they still available or did you rebuild them with modern stuff inside? They remind me somewhat of what our army called FFR Landrovers. (Fitted For Radio). Long wheel base, there were 4 BIG 12v batteries in the back. Hooked up in series and parallel so they pushed out 24v. Used by signallers. I always thought the latter were a necessary waste of space as they were always so intent on signals that they never ran the engine in order to keep the batteries charged. Those vehicles were a pig to start with a crank handle. Simon *From:* Healeys *On Behalf Of *Hank Leach *Sent:* 14 November 2026 03:34 *To:* Bob Spidell *Cc:* Healeys ; Michael Salter < michael.salter at gmail.com> *Subject:* Re: [Healeys] The Story of Positive Earth (and Electrics 101) Positive ground forever! Hank -------------------- From: "Bob Spidell" To: Cc: "Michael Salter" , "Healeys" < healeys at autox.team.net> Sent: November 13, 2026 at 11:04 AM PST Subject: Re: [Healeys] The Story of Positive Earth (and Electrics 101) And Healeys got a shout out for being one of the last holdouts ? On Nov 13, 2026, at 9:54?AM, Hank Leach wrote: No wonder I always had to clean the green off my battery terminals. I'm old school so I will stick to Pos. ground. Thanks for the link Bob-it was well explained and although the world thought the British "backward" their theory had merit. Hank -------------------- From: "Bob Spidell via Healeys" Reply-To: "Bob Spidell" To: "Michael Salter" , "Healeys" < healeys at autox.team.net> Sent: November 13, 2026 at 8:37 AM PST Subject: Re: [Healeys] The Story of Positive Earth (and Electrics 101) YW Michael. Probably AI generated--I still wonder why we got an extended shot of an ice skater--but I couldn't find any discrepancies with what I know about the subject. Source has other videos--on magnetos, torsion bars, etc.--but I haven't watched them yet. bs On 11/13/2026 7:22 AM, Michael Salter wrote: Thanks Bob, one of the best researched articles on the subject that I have ever seen. ------------------------------ *From:* Healeys on behalf of Bob Spidell via Healeys *Sent:* Thursday, 12 November 2026 17:26:57 *To:* Healeys *Subject:* [Healeys] The Story of Positive Earth (and Electrics 101) I highly recommend: https://www.youtube.com/watch?v=7hvfmpJQvwA bs -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20240802_154703.jpg Type: image/jpeg Size: 389978 bytes Desc: not available URL: From bspidell at comcast.net Sat Nov 14 20:01:46 2026 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 14 Nov 2026 19:01:46 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> Message-ID: <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> I got fed up with the 17H 6Vs I'd used for years; they were hard to find, would barely crank my BN2's (170+psi on all 4) rebuilt starter and came close to contacting the lid. So, I threw in the towel on original. IIRC, these are over 450CCA so two in parallel give close to 900A, with 00 cables linking them in parallel. The starter sounds stronger than my BJ8's with a 500CCA AGM. https://4xspower.com/collections/d-series-batteries? ? ? (NFI). If my (rudimentary) knowledge is correct, inductive loads like starters are almost dead shorts for a few milliseconds, until impedance builds as the motor starts to rotate (hence 450 amps). Besides the current draw, there will be a voltage drop, which reduces cranking power. I'd be interested in a voltage reading during cranking; old school load testers--the kind with carbon pile resistance--use the voltage drop to determine if a battery is good (and they usually test for 30 seconds or more). Of course, cold 20W/50 oil doesn't facilitate easy starting. One of my tractors--an early Ford--had a single 6V battery and pos. gnd. and starting it was a coin toss. It would only crank, very slowly, for about 20 seconds before giving up the ghost. I recently converted it to 12V neg. gnd. and it snaps to life on the first or second crank. Bob On 11/14/2026 10:52 AM, Michael Salter wrote: > Interesting that you should bring this subject up Hank. I'm always on > the lookout for a solution but, as yet not much has shown up. > The primary issue is the "stalled" current draw of the M418 starter > motor of around 450 amps. > I have found a 12 volt battery which will fit into the case which > delivers 225 amps. > Tests on my BN1 with around 9.5: 1 compressions show that it can draw > something like 280 amps on a cold day at first attempt with 20/50 oil. > Once it has cranked over a few times this drops to under 200 amps. > My BN2 with its standard 7.5:1 compressions only draws around 130 amps > from cold. > I'm working with a battery company at present who have a "power > sports" battery which would fit into the original case which delivers > 225 CCA so it's likely that that battery would work with the BN2 but, > because it is fuel injected I'm still trying to figure out if that > battery has sufficient reserve capacity to provide the 8 amps the EFI > system requires for sufficient time at idle. > BTW, not wanting to burst your bubble but I'm fairly sure now that the > 17L cases suppied by Antique Battery actually weren't correct for a 100! > I bought? pair from Kent Lacy that were from the very low mileage car > that he had and they are quite different.? I understand that the A B > cases were actually correct for an MGA. > This is, I believe, what the original Lucas battery used in the 100 > looked like. > > M > > > > > > ------------------------------------------------------------------------ > *From:* Hank Leach > *Sent:* Saturday, 14 November 2026 12:56:31 > *To:* simon.lachlan at alexarevel.plus.com > > *Cc:* michael.salter at gmail.com ; Healey team > > *Subject:* RE: RE: [Healeys] The Story of Positive Earth (and > Electrics 101) > Simon-long story about batteries. The brief answer is they are > originally Lucas style (licensed) made by Antique Battery in > Pennsylvania. (now out of business) They were dry charged and about > $300 each. They lasted about 3 years and spit acid all over my RE and > axle as they gassed/vented. Finally, in desperation I went to one > universal 12V on the passenger (here RT side) which fit the tray. > Since they were so accurate in looks, I could not bring myself to > throw them away so I took Michael Salter's advice and cut them open, > discarding the plates, and that is how they now are; cleaned up but > empty-0 volts. I had intended to try Michaels solution but he did not > have good results with the underpowered and dangerous Lithium > batteries, so I am still in search of a 12V. AGM (Lead/acid-sealed) > unit small enough to fit inside the case. (like an ATV size) That > would be a safer sealed battery. Not yet found one with enough CCA. > In the meantime I am preparing the dummy side(LH) to be just a > connection to ground, so that looking into the compartment, all looks > sort of correct. There is a company on eBay, presently making one > look-a-like 17L but without Lucas logo as they could not get Lucas to > approve them-still costing $350 each and also dry charged old style > spitting acid type. These I don't want. > So as good as they look they are not currently functional in my 100. > Sad story. Waiting for Michael to come up with a solution. Hope he > finds something and then they can be POSITIVE GROUND. Hank > > -------------------- > > From: > To: > Sent: November 14, 2026 at 1:27 AM PST > Subject: RE: [Healeys] The Story of Positive Earth (and Electrics 101) > > Great pics. Batteries look new. For interest?s sake ? I have a BT7 ? > are they repros or are they still available or did you rebuild them > with modern stuff inside? > > They remind me somewhat of what our army called FFR Landrovers. > (Fitted For Radio). Long wheel base, there were 4 BIG 12v batteries in > the back. Hooked up in series and parallel so they pushed out 24v. > Used by signallers. I always thought the latter were a necessary waste > of space as they were always so intent on signals that they never ran > the engine in order to keep the batteries charged. Those vehicles were > a pig to start with a crank handle. > > Simon > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 100MBatteries.JPG Type: image/jpeg Size: 933420 bytes Desc: not available URL: From josef-eckert at t-online.de Sun Nov 15 00:18:58 2026 From: josef-eckert at t-online.de (josef-eckert at t-online.de) Date: Sun, 15 Nov 2026 08:18:58 +0100 (CET) Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> Message-ID: <1794727138791.187398.de6010d65392748982ca71eb5333e6a3f1314fae@spica.telekom.de> I think that?s far over the top what you do. Have you ever tried just one of the two batteries? I use just one Harley Davidson motorcycle 12Volt, 35 Ah, battery which is covered by the original battery body top, left and right side. Only front and rear of the battery are not covered, which can?t be seen. The second is just a dummi. That works fine for me and it always gets the engine cranked in full speed to start it. Josef Eckert Konigswinter. Germany -----Original-Nachricht----- Betreff: Re: [Healeys] The Story of Positive Earth (and Electrics 101) Datum: 2026-11-15T04:24:13+0100 Von: "Bob Spidell via Healeys" An: "healeys at autox.team.net" I got fed up with the 17H 6Vs I'd used for years; they were hard to find, would barely crank my BN2's (170+psi on all 4) rebuilt starter and came close to contacting the lid. So, I threw in the towel on original. IIRC, these are over 450CCA so two in parallel give close to 900A, with 00 cables linking them in parallel. The starter sounds stronger than my BJ8's with a 500CCA AGM. (NFI). If my (rudimentary) knowledge is correct, inductive loads like starters are almost dead shorts for a few milliseconds, until impedance builds as the motor starts to rotate (hence 450 amps). Besides the current draw, there will be a voltage drop, which reduces cranking power. I'd be interested in a voltage reading during cranking; old school load testers--the kind with carbon pile resistance--use the voltage drop to determine if a battery is good (and they usually test for 30 seconds or more). Of course, cold 20W/50 oil doesn't facilitate easy starting. One of my tractors--an early Ford--had a single 6V battery and pos. gnd. and starting it was a coin toss. It would only crank, very slowly, for about 20 seconds before giving up the ghost. I recently converted it to 12V neg. gnd. and it snaps to life on the first or second crank. Bob On 11/14/2026 10:52 AM, Michael Salter wrote: Interesting that you should bring this subject up Hank. I'm always on the lookout for a solution but, as yet not much has shown up. The primary issue is the "stalled" current draw of the M418 starter motor of around 450 amps. I have found a 12 volt battery which will fit into the case which delivers 225 amps. Tests on my BN1 with around 9.5: 1 compressions show that it can draw something like 280 amps on a cold day at first attempt with 20/50 oil. Once it has cranked over a few times this drops to under 200 amps. My BN2 with its standard 7.5:1 compressions only draws around 130 amps from cold. I'm working with a battery company at present who have a "power sports" battery which would fit into the original case which delivers 225 CCA so it's likely that that battery would work with the BN2 but, because it is fuel injected I'm still trying to figure out if that battery has sufficient reserve capacity to provide the 8 amps the EFI system requires for sufficient time at idle. BTW, not wanting to burst your bubble but I'm fairly sure now that the 17L cases suppied by Antique Battery actually weren't correct for a 100! I bought pair from Kent Lacy that were from the very low mileage car that he had and they are quite different. I understand that the A B cases were actually correct for an MGA. This is, I believe, what the original Lucas battery used in the 100 looked like. M -------------------------------------------------------------------- From: Hank Leach > Sent: Saturday, 14 November 2026 12:56:31 To: simon.lachlan at alexarevel.plus.com < simon.lachlan at alexarevel.plus.com > Cc: michael.salter at gmail.com < michael.salter at gmail.com >; Healey team > Subject: RE: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Simon-long story about batteries. The brief answer is they are originally Lucas style (licensed) made by Antique Battery in Pennsylvania. (now out of business) They were dry charged and about $300 each. They lasted about 3 years and spit acid all over my RE and axle as they gassed/vented. Finally, in desperation I went to one universal 12V on the passenger (here RT side) which fit the tray. Since they were so accurate in looks, I could not bring myself to throw them away so I took Michael Salter's advice and cut them open, discarding the plates, and that is how they now are; cleaned up but empty-0 volts. I had intended to try Michaels solution but he did not have good results with the underpowered and dangerous Lithium batteries, so I am still in search of a 12V. AGM (Lead/acid-sealed) unit small enough to fit inside the case. (like an ATV size) That would be a safer sealed battery. Not yet found one with enough CCA. In the meantime I am preparing the dummy side(LH) to be just a connection to ground, so that looking into the compartment, all looks sort of correct. There is a company on eBay, presently making one look-a-like 17L but without Lucas logo as they could not get Lucas to approve them-still costing $350 each and also dry charged old style spitting acid type. These I don't want. So as good as they look they are not currently functional in my 100. Sad story. Waiting for Michael to come up with a solution. Hope he finds something and then they can be POSITIVE GROUND. Hank -------------------- From: > To: > Sent: November 14, 2026 at 1:27 AM PST Subject: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Great pics. Batteries look new. For interest?s sake ? I have a BT7 ? are they repros or are they still available or did you rebuild them with modern stuff inside? They remind me somewhat of what our army called FFR Landrovers. (Fitted For Radio). Long wheel base, there were 4 BIG 12v batteries in the back. Hooked up in series and parallel so they pushed out 24v. Used by signallers. I always thought the latter were a necessary waste of space as they were always so intent on signals that they never ran the engine in order to keep the batteries charged. Those vehicles were a pig to start with a crank handle. Simon ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sun Nov 15 07:22:12 2026 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 15 Nov 2026 06:22:12 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <1794727138791.187398.de6010d65392748982ca71eb5333e6a3f1314fae@spica.telekom.de> References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> <1794727138791.187398.de6010d65392748982ca71eb5333e6a3f1314fae@spica.telekom.de> Message-ID: <9db4da30-78f1-493a-8b61-4ed055202c92@comcast.net> Nope. On 11/14/2026 11:18 PM, josef-eckert at t-online.de wrote: > > I think that?s far over the top what you do. Have you ever tried just > one of the two batteries? > > I use just one Harley Davidson motorcycle 12Volt, 35 Ah, battery which > is covered by the original battery body top, left and right side. Only > front and rear of the battery are not covered, which can?t be seen. > The second is just a dummi. That works fine for me and it always gets > the engine cranked in full speed to start it. > > Josef Eckert > > Konigswinter. Germany > > -----Original-Nachricht----- > > Betreff: Re: [Healeys] The Story of Positive Earth (and Electrics 101) > > Datum: 2026-11-15T04:24:13+0100 > > Von: "Bob Spidell via Healeys" > > An: "healeys at autox.team.net" > > I got fed up with the 17H 6Vs I'd used for years; they were hard to > find, would barely crank my BN2's (170+psi on all 4) rebuilt starter > and came close to contacting the lid. So, I threw in the towel on > original. IIRC, these are over 450CCA so two in parallel give close to > 900A, with 00 cables linking them in parallel. The starter sounds > stronger than my BJ8's with a 500CCA AGM. > > https://4xspower.com/collections/d-series-batteries ? ? (NFI). > > > If my (rudimentary) knowledge is correct, inductive loads like > starters are almost dead shorts for a few milliseconds, until > impedance builds as the motor starts to rotate (hence 450 amps). > Besides the current draw, there will be a voltage drop, which reduces > cranking power. I'd be interested in a voltage reading during > cranking; old school load testers--the kind with carbon pile > resistance--use the voltage drop to determine if a battery is good > (and they usually test for 30 seconds or more). Of course, cold 20W/50 > oil doesn't facilitate easy starting. > > One of my tractors--an early Ford--had a single 6V battery and pos. > gnd. and starting it was a coin toss. It would only crank, very > slowly, for about 20 seconds before giving up the ghost. I recently > converted it to 12V neg. gnd. and it snaps to life on the first or > second crank. > > Bob > > > On 11/14/2026 10:52 AM, Michael Salter wrote: > > Interesting that you should bring this subject up Hank. I'm always > on the lookout for a solution but, as yet not much has shown up. > The primary issue is the "stalled" current draw of the M418 > starter motor of around 450 amps. > I have found a 12 volt battery which will fit into the case which > delivers 225 amps. > Tests on my BN1 with around 9.5: 1 compressions show that it can > draw something like 280 amps on a cold day at first attempt with > 20/50 oil. > Once it has cranked over a few times this drops to under 200 amps. > My BN2 with its standard 7.5:1 compressions only draws around 130 > amps from cold. > I'm working with a battery company at present who have a "power > sports" battery which would fit into the original case which > delivers 225 CCA so it's likely that that battery would work with > the BN2 but, because it is fuel injected I'm still trying to > figure out if that battery has sufficient reserve capacity to > provide the 8 amps the EFI system requires for sufficient time at > idle. > BTW, not wanting to burst your bubble but I'm fairly sure now that > the 17L cases suppied by Antique Battery actually weren't correct > for a 100! > I bought? pair from Kent Lacy that were from the very low mileage > car that he had and they are quite different.? I understand that > the A B cases were actually correct for an MGA. > This is, I believe, what the original Lucas battery used in the > 100 looked like. > M > > > > ------------------------------------------------------------------------ > *From:* Hank Leach > *Sent:* Saturday, 14 November 2026 12:56:31 > *To:* simon.lachlan at alexarevel.plus.com > > *Cc:* michael.salter at gmail.com ; Healey > team > *Subject:* RE: RE: [Healeys] The Story of Positive Earth (and > Electrics 101) > Simon-long story about batteries. The brief answer is they are > originally Lucas style (licensed) made by Antique Battery in > Pennsylvania. (now out of business) They were dry charged and > about $300 each. They lasted about 3 years and spit acid all over > my RE and axle as they gassed/vented. Finally, in desperation I > went to one universal 12V on the passenger (here RT side) which > fit the tray. > Since they were so accurate in looks, I could not bring myself to > throw them away so I took Michael Salter's advice and cut them > open, discarding the plates, and that is how they now are; cleaned > up but empty-0 volts. I had intended to try Michaels solution but > he did not have good results with the underpowered and dangerous > Lithium batteries, so I am still in search of a 12V. AGM > (Lead/acid-sealed) unit small enough to fit inside the case. (like > an ATV size) That would be a safer sealed battery. Not yet found > one with enough CCA. > In the meantime I am preparing the dummy side(LH) to be just a > connection to ground, so that looking into the compartment, all > looks sort of correct. There is a company on eBay, presently > making one look-a-like 17L but without Lucas logo as they could > not get Lucas to approve them-still costing $350 each and also dry > charged old style spitting acid type. These I don't want. > So as good as they look they are not currently functional in my > 100. Sad story. Waiting for Michael to come up with a solution. > Hope he finds something and then they can be POSITIVE GROUND. Hank > > -------------------- > > From: > To: > Sent: November 14, 2026 at 1:27 AM PST > Subject: RE: [Healeys] The Story of Positive Earth (and Electrics 101) > > Great pics. Batteries look new. For interest?s sake ? I have a BT7 > ? are they repros or are they still available or did you rebuild > them with modern stuff inside? > > They remind me somewhat of what our army called FFR Landrovers. > (Fitted For Radio). Long wheel base, there were 4 BIG 12v > batteries in the back. Hooked up in series and parallel so they > pushed out 24v. Used by signallers. I always thought the latter > were a necessary waste of space as they were always so intent on > signals that they never ran the engine in order to keep the > batteries charged. Those vehicles were a pig to start with a crank > handle. > > Simon > > ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Sun Nov 15 08:00:09 2026 From: michael.salter at gmail.com (Michael Salter) Date: Sun, 15 Nov 2026 15:00:09 +0000 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: <9db4da30-78f1-493a-8b61-4ed055202c92@comcast.net> References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> <1794727138791.187398.de6010d65392748982ca71eb5333e6a3f1314fae@spica.telekom.de> <9db4da30-78f1-493a-8b61-4ed055202c92@comcast.net> Message-ID: As an interesting note on this subject in one on their training manuals Lucas indicates that their studies found that a 4 cylinder engine took noticeably more starter pwer to crank than a 6 or 8 . My guess is that the pressure in any cylinder was completely dissipated before a compression stroke started. Well I found interesting ??? ________________________________ From: Healeys on behalf of Bob Spidell via Healeys Sent: Sunday, 15 November 2026 09:22:12 To: josef-eckert at t-online.de ; Healey, Forum Subject: Re: [Healeys] The Story of Positive Earth (and Electrics 101) Nope. On 11/14/2026 11:18 PM, josef-eckert at t-online.de wrote: I think that?s far over the top what you do. Have you ever tried just one of the two batteries? I use just one Harley Davidson motorcycle 12Volt, 35 Ah, battery which is covered by the original battery body top, left and right side. Only front and rear of the battery are not covered, which can?t be seen. The second is just a dummi. That works fine for me and it always gets the engine cranked in full speed to start it. Josef Eckert Konigswinter. Germany -----Original-Nachricht----- Betreff: Re: [Healeys] The Story of Positive Earth (and Electrics 101) Datum: 2026-11-15T04:24:13+0100 Von: "Bob Spidell via Healeys" An: "healeys at autox.team.net" I got fed up with the 17H 6Vs I'd used for years; they were hard to find, would barely crank my BN2's (170+psi on all 4) rebuilt starter and came close to contacting the lid. So, I threw in the towel on original. IIRC, these are over 450CCA so two in parallel give close to 900A, with 00 cables linking them in parallel. The starter sounds stronger than my BJ8's with a 500CCA AGM. https://4xspower.com/collections/d-series-batteries (NFI). If my (rudimentary) knowledge is correct, inductive loads like starters are almost dead shorts for a few milliseconds, until impedance builds as the motor starts to rotate (hence 450 amps). Besides the current draw, there will be a voltage drop, which reduces cranking power. I'd be interested in a voltage reading during cranking; old school load testers--the kind with carbon pile resistance--use the voltage drop to determine if a battery is good (and they usually test for 30 seconds or more). Of course, cold 20W/50 oil doesn't facilitate easy starting. One of my tractors--an early Ford--had a single 6V battery and pos. gnd. and starting it was a coin toss. It would only crank, very slowly, for about 20 seconds before giving up the ghost. I recently converted it to 12V neg. gnd. and it snaps to life on the first or second crank. Bob On 11/14/2026 10:52 AM, Michael Salter wrote: Interesting that you should bring this subject up Hank. I'm always on the lookout for a solution but, as yet not much has shown up. The primary issue is the "stalled" current draw of the M418 starter motor of around 450 amps. I have found a 12 volt battery which will fit into the case which delivers 225 amps. Tests on my BN1 with around 9.5: 1 compressions show that it can draw something like 280 amps on a cold day at first attempt with 20/50 oil. Once it has cranked over a few times this drops to under 200 amps. My BN2 with its standard 7.5:1 compressions only draws around 130 amps from cold. I'm working with a battery company at present who have a "power sports" battery which would fit into the original case which delivers 225 CCA so it's likely that that battery would work with the BN2 but, because it is fuel injected I'm still trying to figure out if that battery has sufficient reserve capacity to provide the 8 amps the EFI system requires for sufficient time at idle. BTW, not wanting to burst your bubble but I'm fairly sure now that the 17L cases suppied by Antique Battery actually weren't correct for a 100! I bought pair from Kent Lacy that were from the very low mileage car that he had and they are quite different. I understand that the A B cases were actually correct for an MGA. This is, I believe, what the original Lucas battery used in the 100 looked like. M ________________________________ From: Hank Leach > Sent: Saturday, 14 November 2026 12:56:31 To: simon.lachlan at alexarevel.plus.com > Cc: michael.salter at gmail.com >; Healey team > Subject: RE: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Simon-long story about batteries. The brief answer is they are originally Lucas style (licensed) made by Antique Battery in Pennsylvania. (now out of business) They were dry charged and about $300 each. They lasted about 3 years and spit acid all over my RE and axle as they gassed/vented. Finally, in desperation I went to one universal 12V on the passenger (here RT side) which fit the tray. Since they were so accurate in looks, I could not bring myself to throw them away so I took Michael Salter's advice and cut them open, discarding the plates, and that is how they now are; cleaned up but empty-0 volts. I had intended to try Michaels solution but he did not have good results with the underpowered and dangerous Lithium batteries, so I am still in search of a 12V. AGM (Lead/acid-sealed) unit small enough to fit inside the case. (like an ATV size) That would be a safer sealed battery. Not yet found one with enough CCA. In the meantime I am preparing the dummy side(LH) to be just a connection to ground, so that looking into the compartment, all looks sort of correct. There is a company on eBay, presently making one look-a-like 17L but without Lucas logo as they could not get Lucas to approve them-still costing $350 each and also dry charged old style spitting acid type. These I don't want. So as good as they look they are not currently functional in my 100. Sad story. Waiting for Michael to come up with a solution. Hope he finds something and then they can be POSITIVE GROUND. Hank -------------------- From: > To: > Sent: November 14, 2026 at 1:27 AM PST Subject: RE: [Healeys] The Story of Positive Earth (and Electrics 101) Great pics. Batteries look new. For interest?s sake ? I have a BT7 ? are they repros or are they still available or did you rebuild them with modern stuff inside? They remind me somewhat of what our army called FFR Landrovers. (Fitted For Radio). Long wheel base, there were 4 BIG 12v batteries in the back. Hooked up in series and parallel so they pushed out 24v. Used by signallers. I always thought the latter were a necessary waste of space as they were always so intent on signals that they never ran the engine in order to keep the batteries charged. Those vehicles were a pig to start with a crank handle. Simon ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sun Nov 15 09:58:03 2026 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 15 Nov 2026 08:58:03 -0800 Subject: [Healeys] The Story of Positive Earth (and Electrics 101) In-Reply-To: References: <34736438-3d60-a433-ed8e-70bd64024581@charter.net> <59a03803-32e7-4be1-a902-d4914bdffbb4@comcast.net> <1794727138791.187398.de6010d65392748982ca71eb5333e6a3f1314fae@spica.telekom.de> <9db4da30-78f1-493a-8b61-4ed055202c92@comcast.net> Message-ID: Jibes with my experience. On 11/15/2026 7:00 AM, Michael Salter wrote: > As an interesting note on this subject in one on their training > manuals Lucas indicates that their studies found that a 4 cylinder > engine took noticeably more starter pwer to crank than a 6 or 8 . > My guess is that the pressure in any cylinder was completely > dissipated before a compression stroke started. > Well I found interesting ??? > > > ------------------------------------------------------------------------ > *From:* Healeys on behalf of Bob > Spidell via Healeys > *Sent:* Sunday, 15 November 2026 09:22:12 > *To:* josef-eckert at t-online.de ; Healey, > Forum > *Subject:* Re: [Healeys] The Story of Positive Earth (and Electrics 101) > Nope. > > On 11/14/2026 11:18 PM, josef-eckert at t-online.de > wrote: >> >> I think that?s far over the top what you do. Have you ever tried just >> one of the two batteries? >> >> I use just one Harley Davidson motorcycle 12Volt, 35 Ah, battery >> which is covered by the original battery body top, left and right >> side. Only front and rear of the battery are not covered, which can?t >> be seen. The second is just a dummi. That works fine for me and it >> always gets the engine cranked in full speed to start it. >> >> Josef Eckert >> >> Konigswinter. Germany >> >> -----Original-Nachricht----- >> >> Betreff: Re: [Healeys] The Story of Positive Earth (and Electrics 101) >> >> Datum: 2026-11-15T04:24:13+0100 >> >> Von: "Bob Spidell via Healeys" >> >> >> An: "healeys at autox.team.net" >> >> >> I got fed up with the 17H 6Vs I'd used for years; they were hard to >> find, would barely crank my BN2's (170+psi on all 4) rebuilt starter >> and came close to contacting the lid. So, I threw in the towel on >> original. IIRC, these are over 450CCA so two in parallel give close >> to 900A, with 00 cables linking them in parallel. The starter sounds >> stronger than my BJ8's with a 500CCA AGM. >> >> https://4xspower.com/collections/d-series-batteries >> ? ? (NFI). >> >> >> If my (rudimentary) knowledge is correct, inductive loads like >> starters are almost dead shorts for a few milliseconds, until >> impedance builds as the motor starts to rotate (hence 450 amps). >> Besides the current draw, there will be a voltage drop, which reduces >> cranking power. I'd be interested in a voltage reading during >> cranking; old school load testers--the kind with carbon pile >> resistance--use the voltage drop to determine if a battery is good >> (and they usually test for 30 seconds or more). Of course, cold >> 20W/50 oil doesn't facilitate easy starting. >> >> One of my tractors--an early Ford--had a single 6V battery and pos. >> gnd. and starting it was a coin toss. It would only crank, very >> slowly, for about 20 seconds before giving up the ghost. I recently >> converted it to 12V neg. gnd. and it snaps to life on the first or >> second crank. >> >> Bob >> >> >> On 11/14/2026 10:52 AM, Michael Salter wrote: >> >> Interesting that you should bring this subject up Hank. I'm >> always on the lookout for a solution but, as yet not much has >> shown up. >> The primary issue is the "stalled" current draw of the M418 >> starter motor of around 450 amps. >> I have found a 12 volt battery which will fit into the case which >> delivers 225 amps. >> Tests on my BN1 with around 9.5: 1 compressions show that it can >> draw something like 280 amps on a cold day at first attempt with >> 20/50 oil. >> Once it has cranked over a few times this drops to under 200 amps. >> My BN2 with its standard 7.5:1 compressions only draws around 130 >> amps from cold. >> I'm working with a battery company at present who have a "power >> sports" battery which would fit into the original case which >> delivers 225 CCA so it's likely that that battery would work with >> the BN2 but, because it is fuel injected I'm still trying to >> figure out if that battery has sufficient reserve capacity to >> provide the 8 amps the EFI system requires for sufficient time at >> idle. >> BTW, not wanting to burst your bubble but I'm fairly sure now >> that the 17L cases suppied by Antique Battery actually weren't >> correct for a 100! >> I bought? pair from Kent Lacy that were from the very low mileage >> car that he had and they are quite different.? I understand that >> the A B cases were actually correct for an MGA. >> This is, I believe, what the original Lucas battery used in the >> 100 looked like. >> M >> >> >> >> ------------------------------------------------------------------------ >> *From:* Hank Leach > >> *Sent:* Saturday, 14 November 2026 12:56:31 >> *To:* simon.lachlan at alexarevel.plus.com >> >> > > >> *Cc:* michael.salter at gmail.com >> >; >> Healey team > >> *Subject:* RE: RE: [Healeys] The Story of Positive Earth (and >> Electrics 101) >> Simon-long story about batteries. The brief answer is they are >> originally Lucas style (licensed) made by Antique Battery in >> Pennsylvania. (now out of business) They were dry charged and >> about $300 each. They lasted about 3 years and spit acid all over >> my RE and axle as they gassed/vented. Finally, in desperation I >> went to one universal 12V on the passenger (here RT side) which >> fit the tray. >> Since they were so accurate in looks, I could not bring myself to >> throw them away so I took Michael Salter's advice and cut them >> open, discarding the plates, and that is how they now are; >> cleaned up but empty-0 volts. I had intended to try Michaels >> solution but he did not have good results with the underpowered >> and dangerous Lithium batteries, so I am still in search of a >> 12V. AGM (Lead/acid-sealed) unit small enough to fit inside the >> case. (like an ATV size) That would be a safer sealed battery. >> Not yet found one with enough CCA. >> In the meantime I am preparing the dummy side(LH) to be just a >> connection to ground, so that looking into the compartment, all >> looks sort of correct. There is a company on eBay, presently >> making one look-a-like 17L but without Lucas logo as they could >> not get Lucas to approve them-still costing $350 each and also >> dry charged old style spitting acid type. These I don't want. >> So as good as they look they are not currently functional in my >> 100. Sad story. Waiting for Michael to come up with a solution. >> Hope he finds something and then they can be POSITIVE GROUND. Hank >> >> -------------------- >> >> From: > > >> To: > >> Sent: November 14, 2026 at 1:27 AM PST >> Subject: RE: [Healeys] The Story of Positive Earth (and Electrics >> 101) >> >> Great pics. Batteries look new. For interest?s sake ? I have a >> BT7 ? are they repros or are they still available or did you >> rebuild them with modern stuff inside? >> >> They remind me somewhat of what our army called FFR Landrovers. >> (Fitted For Radio). Long wheel base, there were 4 BIG 12v >> batteries in the back. Hooked up in series and parallel so they >> pushed out 24v. Used by signallers. I always thought the latter >> were a necessary waste of space as they were always so intent on >> signals that they never ran the engine in order to keep the >> batteries charged. Those vehicles were a pig to start with a >> crank handle. >> >> Simon >> >> ? > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Nov 16 10:25:41 2026 From: eyera3000 at gmail.com (vfwac@vfw.org) Date: Mon, 16 Nov 2026 09:25:41 -0800 Subject: [Healeys] Nice car! In-Reply-To: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: I have owned my 59 BN4 for over 53 years, but I have loved the BJ7 ever since I got old and would enjoy roll up windows and a convertible top:) Ira Erbs Milwaukie, OR 1959 Austin Healey 100-6 On Sat, Nov 7, 2026, 11:43?AM Mark Bradakis via Healeys < healeys at autox.team.net> wrote: > > I wonder what the reserve on this was? Looks like a very nice car. > > https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 > > > mjb. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/healeys > http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Mon Nov 16 15:27:29 2026 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Mon, 16 Nov 2026 22:27:29 +0000 Subject: [Healeys] Nice car! In-Reply-To: References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: Back in the good ol days when I worked for BMC at their SE distributors in WPB, Fla (Ed Bussey was a co owner) it was said the days of great Healey cars disappeared with the advent of roll up windows and convertible tops Regards, Richard C BN7. 440 Bowling Green, KY On Nov 16, 2026, at 11:35, eyera3000 at gmail.com wrote: ? I have owned my 59 BN4 for over 53 years, but I have loved the BJ7 ever since I got old and would enjoy roll up windows and a convertible top:) Ira Erbs Milwaukie, OR 1959 Austin Healey 100-6 On Sat, Nov 7, 2026, 11:43?AM Mark Bradakis via Healeys > wrote: I wonder what the reserve on this was? Looks like a very nice car. https://bringatrailer.com/listing/1963-austin-healey-3000-mk-iia-22 mjb. _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90 at hotmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at bradakis.com Mon Nov 16 15:43:32 2026 From: mark at bradakis.com (Mark Bradakis) Date: Mon, 16 Nov 2026 15:43:32 -0700 Subject: [Healeys] Nice car! In-Reply-To: References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> Message-ID: <62b86337-1613-4324-8cd3-17aa70ebb93a@bradakis.com> On 11/16/26 3:27 PM, Richard Collins wrote: > Back in the good ol days when I worked for BMC at their SE distributors > in WPB, Fla (Ed Bussey was a co owner) it was said the days of great > Healey cars disappeared with the advent of roll up windows and > convertible tops I currently drive a 2010 Jaguar XK, 5 litre naturally aspirated. It has power this, automatic that, computers everywhere. A far cry from a real, hairy chested Austin Healey. But on a twisty two lane mountain road, give it some Wellie and hoo boy!! mjb. -------------- next part -------------- A non-text attachment was scrubbed... Name: 20260716_120417.jpg Type: image/jpeg Size: 838071 bytes Desc: not available URL: From gonnagitcha90 at hotmail.com Mon Nov 16 21:19:19 2026 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Tue, 17 Nov 2026 04:19:19 +0000 Subject: [Healeys] Nice car! In-Reply-To: <62b86337-1613-4324-8cd3-17aa70ebb93a@bradakis.com> References: <774b1f0e-e664-4240-a763-118d1fbd0c0b@bradakis.com> <62b86337-1613-4324-8cd3-17aa70ebb93a@bradakis.com> Message-ID: Yep love Jags too, particularly XK 150 Dropheads. A little too soft for Tail of the Dragon but awesome for fall leaf runs Regards, Richard C > On Nov 16, 2026, at 18:54, Mark Bradakis via Healeys wrote: > > ?On 11/16/26 3:27 PM, Richard Collins wrote: >> Back in the good ol days when I worked for BMC at their SE distributors in WPB, Fla (Ed Bussey was a co owner) it was said the days of great Healey cars disappeared with the advent of roll up windows and convertible tops > > I currently drive a 2010 Jaguar XK, 5 litre naturally aspirated. It has power this, automatic that, computers everywhere. A far cry from a real, hairy chested Austin Healey. But on a twisty two lane mountain road, give it some Wellie and hoo boy!! > > mjb. > <20260716_120417.jpg> > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90 at hotmail.com >