[Mg-t] lights and wiper questions

[Gerald Felper]

The stop plate is not used on MGs
Jerry

On Apr 28, 2009, at 10:19 PM, Lawrence Karpman wrote:

> I have a '53 and don't know what you mean by blade stop plate.  
> Also, is your windscreen wet when you try the wipers? Mine will do  
> the same as yours when the screen is dry.
>
> Cheers
>
> Larry
>
> ----- Original Message ----- From: <hstrachman at yahoo.com>
> To: "MG" <Mg-t at autox.team.net>
> Sent: Tuesday, April 28, 2009 10:31 PM
> Subject: [Mg-t] lights and wiper questions
>
>
>> Greetings
>> I have two problems with my late  53 TD.
>> One, the wipers --when I turn them on, they will make one sweep  
>> and then bind
>> up. The motor was built by a respected builder in New England. All  
>> parts are
>> moving freely but it just stops. Also, can you tell me what the  
>> blade stop
>> plate does?  I'm missing mine.
>>
>> Two, the lights--with key off, light switch in first position,  
>> front and rear
>> lights are bright -- when key switch is turned to power all 4  
>> lights dim. Plus
>> no brake lights.  I replaced brake light switch, recently, and brakes
>> lights worked after replacement.
>>
>> Thanks
>>
>> Herb
>> _______________________________________________
>>
>> Support Team.Net  http://www.team.net/donate.html
>>
>> Mg-t at autox.team.net
>> http://autox.team.net/mailman/listinfo/mg-t
>>
>> Archives at http://www.team.net/archive
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Mg-t at autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive

Gerald Felper
Felper Engineering
felperg at earthlink.net