[Mg-t] Gas line replacement

[Gerald Felper]

Lew
I have been using copper fuel lines, as original, for 20 years with no  
problems. There is very little, if any movement or vibration of the  
copper lines and therefore little harding.
Jerry

On Jun 10, 2010, at 9:38 AM, Lew Palmer wrote:

> Silver solder. DO NOT soft solder them.
>
> Lew Palmer
>
> -----Original Message-----
> From: mg-t-bounces at autox.team.net [mailto:mg-t- 
> bounces at autox.team.net] On
> Behalf Of Larry Shoer
> Sent: Thursday, June 10, 2010 10:44 AM
> To: mg-t at autox.team.net
> Subject: Re: [Mg-t] Gas line replacement
>
> Next we need some discussion about how to attach the copper-nickel
> tubing to the brass solder fittings at the tank and fuel pump.
>
> (I do believe a LOT of us are running around with copper fuel lines.
> Isn't that what Moss sells?)
>
> Larry
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/lpalmer@roundaboutmanor.com
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/felperg@earthlink.net
>

Gerald Felper
Felper Engineering
felperg at earthlink.net