[Mg-t] front seal

[John Seim]

You have to remove the oil pan and front timing cover.
Chances are, the lip seal cut a groove into the cast iron front crank pulley.
You might want to place a Speedi-Sleeve onto the pulley shaft, for the rope
seal to seal against. CR99146. 1.411-1.417 diameters.

John Seim
Irvine, CA

On Aug 4, 2013, at 8:32 PM, Duvall Video Productions wrote:

> Does anyone have any experience with replacing the crank front rope seal
> without removing the engine?  Is it possible?
>
> ( don't mention the crappy kits moss sells,  I used their parts and my T
leaks
> worse than ever)
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums