[Mg-t] Starter rebuild...

[Rick Lindsay]

Hi John. B Thanks. B They may be aluminum. B If so, I understand the problem. B Thanks.

-rick


Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just like a BlackBerry.

-------- Original message --------
From: John Seim <kingseim at earthlink.net> 
Date: 08/06/2013  4:18 PM  (GMT-06:00) 
To: Rick Lindsay <richardolindsay at gmail.com> 
Cc: mg-t at autox.team.net,mgs at autox.team.net 
Subject: Re: [Mg-t] Starter rebuild... 
 
Chances are, you have aluminum replacement coils in your starter.
Originally, the brushes were crimped to the aluminum, as you cannot solder
them. Might have been spot welded. When brushes need to be replaced,
and the field coil is made of aluminum, best to replace the field coils with
those made of copper.

John Seim
Irvine, CA

On Aug 6, 2013, at 2:00 PM, Rick Lindsay wrote:

> Hi Friends,
> 
> My '53 TD's M35G starter rebuild is almost complete. B Everything is clean and lubricated, where appropriate. B Bushes are just fine, oil soaked and their journals are smooth.
> 
> What I did discover is that the brass terminal post is not soldered to the field windings! B The two flat conductors from the field, were just pinched into the slot in the inner end of the post. B They were quite grimey at the contact point, so they've been like this for quite a while.
> 
> Reviewing the workshop manual today, I see that the flat conductors should be (apparently) soldered to the post. B Can you verify that is correct? B Considering the current drawn, I can't imagine that a simple press-fit connection is valid - but I could be wrong. B Your thoughts?
> 
> -rick
> 
> 
> Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just like a BlackBerry.
> ______________________________________________
> 
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donationB  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/kingseim@earthlink.net