[Mgs] Need help re MGB windshield replacement.

[Barney Gaylord]

At 02:09 PM 8/6/2007 -0700, Larry Richardson wrote:
>....
>I have a 1977 MGB Roadster, .... replacing the windshield.
>
>.... wondering how to attach the lower frame to the side post once 
>the seal is properly located. How do I then get  the 2 screws that 
>attach the lower frame to the side frame into their position, as the 
>seal will then be covering where they mount.
>....

Been there.  See here: http://chicagolandmgclub.com/photos/b_windscreen2
Cut two small holes in the rubber strip, just large enough to pass 
the screws and screwdriver tip.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
Webmaster and (hopefully temporary) Editor
Chicagoland MG Club
http://ChicagolandMGclub.com