[Mgs] Advice wanted on MGB Brake Master Cylinder

[The Roxter]

James Nazarian wrote:
> If the ring doesn't come out easily I usually drill a series of holes in it
> until I can break it apart and extract the bits with tweezers.
>
> In my experience, the only rebuilds that are successful are those where the
> MC was working when the car was parked and the seals disintegrated due to
> age.  If the MC is worn to the point of leaking, then the bore is typically
> worn enough that a rebuild won't last more than a few months.  For all the
> hassle of installation, I'd just replace it unless you know for sure that it
> was working prior to the car being laid up for decades.
>   
I'm going to give it a try, but I'm going to hone the bore before reassembling.

-The Roxter
--