[Mgs] Restraining rod nuts

[Paul Hunt]

But then it doesn't show any nuts.

Even more amusingly (if you try to use their diagram as an aid to 
reassembly) it shows the rod and bellhousing bracket the wrong way round ...

Incidentally there should be a plain nut on the rod first, then through the 
bushes and bracketry, then the stiff-nut.  When assembled the plain nut is 
unscrewed until it contacts the front plate, then the stiff-nut is tightened 
onto the back plate.  There is a spacer through the middle of the bushes and 
bracket, and the nuts tighten onto this.

----- Original Message ----- 
> Amusingly, Moss does not show any nut for the restraining rod.