[Mgs] Cowl vent drainage

[Paul Hunt]

You should see hole down through the right-hand end of the grille, but only 
once it is dry, other wise you will have to prod around until you can feel 
it.  See http://www.mgb-stuff.org.uk/heatertext.htm#airb.  Be a bit careful 
prodding at it through, the rubber hose is secured onto a spigot and this 
can corrode, violent prodding if the hose is well blocked could break it 
off.  The problem is that the spigot is in a double-skinned portion of the 
tunnel and there is no easy way of getting at it to repair it, and further 
rain will fill the double-skinned part, either draining into the car through 
seams or rotting it out.

PaulH.

----- Original Message ----- 
> Can anyone give me some tips on how to restore the cowl vent drainage, if 
> any,
> in my 67 MGBGT?