[Mgs] MGB Turn Signals

[PaulHunt73]

Mea culpa, logic failure.  Because the hazards flash all four corners it can't be the bullet connector where the rear harness joins the main harness either.

So either the switch, or possibly the connector block as described.  This may help with the switch http://www.mgb-stuff.org.uk/turnswitch.htm#1

PaulH.
  ----- Original Message ----- 


  Message tell, that hazard switch let all 4 lamps flash. So no ground issue at the lamps, nor the feed from the hazard unit. I still opt for a lose connection between the stalk switch and the interconnection, where this connection hooks up at the wire from the hazard switch.

   

  Yes, the hazard flasher unit "feeds" the indicator flasher unit, but if the hazard flasher is not feeding that line, both sides (left and right) indicators will not work.

  In the problem description left is working and right is not.

   

  My 2 cents (or for Paul pence)

   

  Cheers,

  Hans '71 BGT


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mgs/attachments/20190316/61bb15e4/attachment.html>