(no subject)

[Chris Davieds]

Tom,
The mixture screws are located on the sides of the carbs.  They are covered
with a brass cap that you need to drill out and remove before you can get to
the screw (drill carefully don't want to hit the screw, sounds scarey but
it's a real easy job)  The one on the front carb is located on the side with
the petcock (you will need to lift your tank alittle to get to it.  The one
on the rear car is on the othe side of the bike (you can see it and get to
it without moving the tank) Someone has posted pictures of what they look
like on their website.  I have it bookmarked at work but not on this
computer, so I'll email you the link when I get to work later.

Noodles
MIG#4755



-----Original Message-----
From: migcruisers-admin@autox.team.net
[mailto:migcruisers-admin@autox.team.net] On Behalf Of Thomas Lage
Sent: Monday, February 14, 2005 5:59 PM
To: migcruisers@autox.team.net
Subject: (no subject)

Help,
Trying to locate fuel mixture screw on carburators of a 2004 800 marauder.

Thanks,
Tom
_______________________________________________
Migcruisers mailing list
Migcruisers@autox.team.net
http://www.team.net/mailman/listinfo/migcruisers