[Morgans] 4/4 Spindle

[Stephen D Stierman]

Assuming this is a standard wire wheel hub, the nut in the middle of the
spindle would be all you would need to take off plus a brake caliper if disc
brakes are used.  The rotor or drum will slide off the spindle.
Steve
________________________________
From: "wbeech at flash.net" <wbeech at flash.net>
To: morgans at autox.team.net 
Sent: Monday, July 1, 2013 9:35 AM
Subject: Re:
[Morgans] 4/4 Spindle


The threads are bad on one of my front wire wheel
adaptors, am  I correct in
seeing that the entire rotor and spindle has to be
removed to remove the
adaptor?

Thanks,
Bill
_______________________________________________

Morgans at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/morgans/morgan7709@sbcglobal.net