[Nobbc] Need Recommendation for interior Woodwork

[aceca289 at aol.com]

Thanks!

If anyone has any more suggestions let me know. I most likely wont get to this
project until after the 1st of the year.

John




-----Original Message-----
From: marcus <desmo93 at att.net>
To: North Bay British Car Club <nobbc at autox.team.net>
Sent: Sat, Dec 11, 2010 12:32 pm
Subject: Re: [Nobbc] Need Recommendation for interior Woodwork


You might try Randy Keller at Prestige Autowood:
http://www.prestigeautowood.com/index.htm
I have one of his Triumph dashboards which absolutely spectacular.  He is
ocated in San Jose.
Marcus
---- Original Message -----
rom: <aceca289 at aol.com>
o: <nobbc at autox.team.net>
ent: Friday, December 10, 2010 10:30 PM
ubject: Re: [Nobbc] Need Recommendation for interior Woodwork

I checked out the web site...they seem more than qualified to do the work!
 Although, I think the work may require my car being on site to fabricate
 the
 pieces correctly...not to say I wouldn't enjoy the ride down the coast to
 Goleta to deliver the car :)

 Any more local referals??





 -----Original Message-----
 From: Clif & Deborah Williamson <hawkview at sonic.net>
 To: North Bay British Car Club <nobbc at autox.team.net>
 Sent: Thu, Dec 9, 2010 9:49 am
 Subject: Re: [Nobbc] Need Recommendation for interior Woodwork


 Madera Concepts.  These are the nicest guys around and do great work.
 They
 re also the best at communication.  I am going to have all of my wood
 one...I think this winter.
 nless they already have patterns for you car, they will need what is going
 o be replaced and probably a piece that you want matched.
 ope this helps.
 on't know of anybody local.
 http://www.maderaconcepts.com/NewSite/Madera_home.html


 ----Original Message-----
 rom: aceca289 at aol.com
 ent: Wednesday, December 08, 2010 9:33 PM
 o: nobbc at autox.team.net
 ubject: [Nobbc] Need Recommendation for interior Woodwork
 HI
 I have been a member for some time but not active with the e-mail
 posts...so
 ere it goes. I have a 1955 AC Aceca (same as Greg Badano's white one with
 he
 acing stripe) and need a recommendation for someone to fabricate some
 nterior wooden trim pieces needed to complete a long awaited restoration
 roject. The pieces in particular are horseshoe shaped strips of laminated
 ood bent to the shape of the rear 1/4 windows. I also have a few other
 ieces
 f woodwork that will need to be refinished. Does anyone have a
 ecommendation
 f someone in the area who can do this kind of work?
 Thanks
 John
 ______________________________________________
 obbc at autox.team.net
 onate: http://www.team.net/donate.html
 uggested annual donation  $11.47
 rchive: http://www.team.net/archive
 orums: http://www.team.net/forums
 nsubscribe/Manage:
 ttp://autox.team.net/mailman/options/nobbc/hawkview@sonic.net
 ______________________________________________
 obbc at autox.team.net
 onate: http://www.team.net/donate.html
 uggested annual donation  $11.47
 rchive: http://www.team.net/archive
 orums: http://www.team.net/forums
 nsubscribe/Manage:
 http://autox.team.net/mailman/options/nobbc/aceca289@aol.com
 _______________________________________________
 Nobbc at autox.team.net
 Donate: http://www.team.net/donate.html
 Suggested annual donation  $11.47
 Archive: http://www.team.net/archive
 Forums: http://www.team.net/forums
 Unsubscribe/Manage:
 http://autox.team.net/mailman/options/nobbc/desmo93@att.net
______________________________________________
obbc at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $11.47
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/nobbc/aceca289@aol.com