[Oletrucks] Pinion Angle

[james hays]

Oletruckers:    Have 55-1st pu with IFS & stock ( new less 2 leafs ) rear
springs. I have two opposite opinions on pinion angle.

Printed info says match the trarns angle with same in opp. direction - trans
down 4 d - pinion down 4 d. with centerlines crossing for pro-touring cars.

Same printed data shows centerlines parallel on the same angle - not crossing
for production passenger cars.

Don't plan on using the truck for much of a truck  - could smoke a tire or two
with fuel injected LT1 - if that makes any difference.

Penny ( dollars ) for your thoughts,

Jim