[Shop-talk] welding mask

[Arvid Jedlicka]

At least one, but not the only solution ...

Go here ... http://www.weldingsupply.com and search - upper left side of the 
page - for lens. About halfway down the search results you will find "2 x 4 
Magnifying Lenses w/Protective Case" and below that are magnifying lenses by 
Jackson. There may be other on the page. And you may be able to find these 
at your local welding supply.

I have several of the Jackson lenses that I use in my Speedglas helmet. It 
fits between the outer lens shield and the autodark unit so it is protected 
from splatter. Highly recommended by me for exactly the problem you have 
described. The only drawback is that they are only a single focal length. 
Not a problem for me but it might make a difference to others.

Arvid

----- Original Message ----- 
From: "Frank Vantacich" <rustymetal at sbcglobal.net>
To: "Shop Talk" <shop-talk at autox.team.net>
Sent: Saturday, August 29, 2009 8:26 AM
Subject: [Shop-talk] welding mask


>I wear bifocals and was wondering if there is a different lens available, 
>so I
> don't have to weld with my head cocked back, for my welding mask to 
> compensate
> for this?
>
>
> Frank V.
> rustymetal at sbcglobal.net
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as arvidj at visi.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive