[Shop-talk] I give up! (almost) read >I know why pipe fitters get some much money!

John T. Blair jblair1948 at cox.net
Fri May 27 10:07:43 MDT 2011


OK, day 5 of the plumbing saga and I'm about to shoot myself!!

Everything is installed, all the lines are good.  Turn on the air and
about 15 different fittings leak badly!!

So, I started the process of undoing the system to get at the joints.
Turns out, that the joints were tight.  They are now f###ing tight and
still leak.

So, it seems that the threads and the joints aren't matting right.  I did
you the correct pipe sealer for the job (and I've tried other types.)

I've actually welded a few joints, but I can't do this to too many as the
system will not be able to be taken apart.  Plus, I can't carry my welder
14' in the air to get the pipes that are on the ceiling.  8>)

So, is there any epoxy compound that I can use?  Does anyone have any
suggestions?  I'm stumped.

As for the cause, I see that my pipe threader has a chipped tooth.  I
think that may have caused bad threads on the pipe.  But a few of the
leaks are where factory fittings are in factory nipples.

Please help!

Moose
"Be as beneficent as the sun or the sea, but if your rights as a rational
being are trenched on, die on the first inch of your territory." Ralph
Waldo Emerson
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/jblair1948@cox.net
John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
Va. Beach, Va
Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!


More information about the Shop-talk mailing list