[Shop-talk] Parts for vise

[pethier at comcast.net]

Drawings don't work on the list.  flickr.com is free.

Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack", Sapphire Blue
2004 Suburban 8.1, Sport Red, the only automatic of the bunch
2005 Lotus Elise, Bordeaux Red Pearl
2007 Saturn Ion 3 2.4, Berry Red
pethier at comcast.net
http://www.flickr.com/photos/pethier
http://www.flickr.com/groups/triumphtransamerica
http://www.mnautox.com
http://www.mntriumphs.org

----- Original Message -----
> From: "Steve Hammatt, Mount Vernon WA USA" <gsteve at hammatt.com>
> To: "Shop Talk" <shop-talk at autox.team.net>
> Sent: Monday, February 11, 2013 3:29:05 PM
> Subject: [Shop-talk] Parts for vise
> Ibm looking for 2 items, both accomplish the same function
> on a vise (bviceb for our British members <grin>). The bTb
> nut that locks the visebs rotation, as illustrated in the dwg
> below (assuming the dwg makes it onto the list) is one item.
> The other item (no example shown) accomplishes the same
> function but instead of the cross-sliding bTb, there is a vertical
> slot milled into the top of the pinch nut. A cross drilled hole
> with pin holds a flip-over piece of flat stock that is used as
> the lever for tightening the locking nut on the vise base.
> My problem may be a lack of knowledge of terms. Hard to
> search if Ibm not using the correct words. Checked Grainger,
> McMaster, vise companies, etc. all to no avail.
> 
> Appreciate any assistance.
> Thanks.