[Shop-talk] Removed wainscoting, now outlet box sticks out

Pat Horne pat at hornesystemstx.com
Tue Jun 18 07:05:13 MDT 2013


I've done a couple more complex things to cure this problem

Use a moto-tool to trim off the box.
You should also be able to get a hack saw blade in between the stud and 
the box and cut off the nails that hold the box in. Slide the box back 
and run screws or nails through the side of the box to hold the correct 
location.

Peace,
Pat

Thusly spake Jim Franklin

> My Google-fu is weak tonight. I removed some wainscoting and now the outlet
> boxes stick out about 1/2". I'm looking for some spacers to add around the box
> so the wall plate will sit flush and it will look ok. Have you heard of such a
> thing? One site recommended the Wire-mould spacers but they didn't look big
> enough in LxW dimensions.
>
> thanks,
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/pat@hornesystemstx.com
>
>
>

-- 
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice & Text	5026 FM 2001
Pat at HorneSystemsTx.com	Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --


More information about the Shop-talk mailing list