[Shop-talk] cove (or 'dish') style cut on a piece of wood.

[Mike Sinclair]

Somewhere (never throw anything away!) I have a brochure from the '50s 
for a table saw that explains how to make a bowl.  Always thought it 
pretty risky, myself.

Mike

On 2/10/2019 1:07 PM, Randall via Shop-talk wrote:
> Hmm, looks like the list server is stuttering again.  I got Phil's reply,
> but not the original post.
>
> Anyway, if you had some way to guide the piece, I might try doing the table
> saw trick.  But it would have to be a very shallow cut, repeated several
> times to get 1/2" depth.  A good carbide wood blade will cut sideways, but
> only to the depth of the carbide inserts.
>
> Probably also not that hard to rig a wood lathe with the swing you need.
> Maybe mount a cheap bench grinder so one end hangs off the edge of the bench
> (giving you somewhere around 7' of swing) and drive the other end.  Main
> difficulty with that is setting up the belt (or gear) train to turn it
> slowly enough.  I've got a DC motor from an old treadmill that would
> probably do the job, combined with a decent (load sensing) electronic speed
> control.
>
> -- Randall
> 56 TR3 TS13571L once and future daily driver
> 71 Stag LE1473 - awaiting engine rebuild
> 71-2-3 Stag - awaiting gearbox rebuild
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/phoenix722@comcast.net
>
>

---
This email has been checked for viruses by AVG.
https://www.avg.com