[Shop-talk] cove (or 'dish') style cut on a piece of wood - Back again for the third time

[Mike Sinclair]

Scary.

On 3/8/2019 12:40 PM, Jim Stone via Shop-talk wrote:
> I know this discussion has been put to bed twice already, but a friend 
> just sent me this link and I couldn’t help but think of the topic:
>
> https://www.furymix.com/products/grinder-disc-chainsaw?fbclid=IwAR1u7xzDGCe2A0xxah7iEY2XEFAg8_3VIDZgtv1BNOc5tllIH1XtyJnFMAg
>
> I don’t know what to think of this.  Part of me wants one really 
> badly.  And the rest of me wants fingers.
>
> Jim
>
>> On Feb 10, 2019, at 6:30 PM, John P. New via Shop-talk 
>> <shop-talk at autox.team.net <mailto:shop-talk at autox.team.net>> wrote:
>>
>> Heh, the original post was in December 2018, so you've just forgotten 
>> that you saw it...
>>
>> John P. New
>> London, Ontario, Canada
>>
>> On Sunday, February 10, 2019 4:07:33 PM EST Randall via Shop-talk wrote:
>>> Hmm, looks like the list server is stuttering again.  I got Phil's 
>>> reply,
>>> but not the original post.
>>>
>>> Anyway, if you had some way to guide the piece, I might try doing 
>>> the table
>>> saw trick.  But it would have to be a very shallow cut, repeated several
>>> times to get 1/2" depth.  A good carbide wood blade will cut 
>>> sideways, but
>>> only to the depth of the carbide inserts.
>>>
>>> Probably also not that hard to rig a wood lathe with the swing you need.
>>> Maybe mount a cheap bench grinder so one end hangs off the edge of 
>>> the bench
>>> (giving you somewhere around 7' of swing) and drive the other end.  Main
>>> difficulty with that is setting up the belt (or gear) train to turn it
>>> slowly enough.  I've got a DC motor from an old treadmill that would
>>> probably do the job, combined with a decent (load sensing) 
>>> electronic speed
>>> control.
>>>
>>> -- Randall
>>> 56 TR3 TS13571L once and future daily driver
>>> 71 Stag LE1473 - awaiting engine rebuild
>>> 71-2-3 Stag - awaiting gearbox rebuild
>>>
>>> _______________________________________________
>>>
>>> Shop-talk at autox.team.net <mailto:Shop-talk at autox.team.net>
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation  $12.96
>>> Archive: http://www.team.net/pipermail/shop-talk
>>>
>>> Unsubscribe/Manage:http://autox.team.net/mailman/options/shop-talk/jnew@hazelden.ca
>>>
>>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Shop-talk at autox.team.net <mailto:Shop-talk at autox.team.net>
>> Donate:http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive:http://www.team.net/pipermail/shop-talk
>>
>> Unsubscribe/Manage:http://autox.team.net/mailman/options/shop-talk/1789alpine@gmail.com
>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/phoenix722@comcast.net
>


---
This email has been checked for viruses by AVG.
https://www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20190308/243e526a/attachment-0001.html>