[Shop-talk] Maybe the weirest shop related question asked here.

[Tom Jones]

There are a few things to consider.

If a bear is your adversary, then a large caliber handgun is needed to get
the penetration to stop their advancement. .357 magnum, 10 mm or 44 magnum,
or a .30 caliber rifle or 12ga shotgun with slugs.  Anything less just may
focus your adversary’s attention on you and really make them mad.

Where are you most likely to be located when a visitor would appear and
where would your firearm be?  Are you back to the door working at a bench
or machine tool, under a car lift or on the floor on a creeper? Will you be
able to reach your firearm and access it before your visitor reaches you?
You don’t want them to corner you where you have no means of escape. Access
will determine the type of secure storage you’ll need. Carrying is fine if
you use a good quality holster with retention and trigger protection. Not
sure how you would present the gun on a creeper under a car though.

What direction would you most likely be firing? Towards your house or your
neighbors house? No matter what you chose to use, what’s behind your
potential target is your 2nd, hitting your target is the first and biggest
headache.

Revolvers are fine and most can be had in stainless as well as shotguns
made for boating use. A lot of semi autos have stainless slides and
barrels. Yes, maintenance, cleaning and oiling will be necessary. Even
stainless firearms have carbon steel parts that need protected.

A can of bear spray may provide enough of a diversion for your visitor so
you can get out of harms way.

Hopefully you keep a cell phone or landline phone close, heaven forbid, you
have a run in and need help.

It may be safer to close the door and find another means of fresh air and
ventilation.

On Wed, Apr 1, 2020 at 3:54 PM Paul Parkanzky via Shop-talk <
shop-talk at autox.team.net> wrote:

> I don't think a revolver is a poor choice but there's no way I'd store
> an expensive revolver like that in the garage.
>
> I agree with other commenters that say that if he doesn't have any
> intention of carrying the firearm that there's no reason to compromise
> with a handgun. I'd choose either a cheap AR-pattern rifle or an
> inexpensive shotgun in one of Hornady's rapidsafe wall mounts or a
> similar secured wall mount.
>
> -Paul
>
> On Tue, Mar 31, 2020 at 10:50 AM Thomas FitzGibbon via Shop-talk
> <shop-talk at autox.team.net> wrote:
> >
> > Eric,
> >
> > I second the stainless steel revolver recommendation, maybe a Colt
> Python in .357 magnum.  I'd be concerned that a semi-auto would be more
> sensitive to that kind of environment, but either way it should not be too
> challenging.  Desiccant packs are going to be critical, especially to
> protect the ammo as the gun itself should be OK with a light coat of oil.
> >
> > Good luck.
> >
> > Tom
> >
> > On March 29, 2020 at 8:38 PM Philip Ethier via Shop-talk <
> shop-talk at autox.team.net> wrote:
> >
> > I'd recommend a stainless double-action revolver, attached to your
> person in a holster designed to make it impossible for the cylinder to
> revolve until the weapon is removed from the holster.
> >
> >
> >
> > On Sun, Mar 29, 2020 at 12:58 PM eric--- via Shop-talk <
> shop-talk at autox.team.net> wrote:
> >
> > Ok, I know I've asked some weird questions before, but I think this one
> will take the cake.
> >
> > I live out in the country, and often work well into the night with a
> large shop door open.  With having bears, coyotes and other large animals
> in the area, I got to thinking, it might be a good idea to keep a pistol in
> the garage to scare off any would be 'late night snackers."
> > Actually, I had a run-in the other night that made me think about this.
> >
> > So my question is, if I have a pistol, in a rapid access safe in a shop
> environment, what factors should I consider?  I understand that humidity
> will play a huge role, as will dust (I have to see how 'sealed' the safe
> is.)
> >
> > Is there anything I'm missing that I should consider?  I understand that
> I will most likely have to clean the weapon often, but is there anything I
> need to think about?
> >
> > Also, I'm open to suggestions for a weapon type.  I thinking an XD-M
> elite polymer hand gun.  With mostly composite parts.  Similar to a Glock.
> (Note, I don't have anything against Glock, I just never owned one.  I do
> have and love my XD however, so Glock isn't out of consideration.)
> >
> > I don't want this to turn into a 2nd amendment thread.  Just a 'what to
> consider' for leaving a pistol in a shop.
> >
> > Note, in my shop I do just about everything, metal work, wood work, car
> and heavy equipment work, etc.
> >
> > Thanks in advance.
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/t.w.jones1@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200401/46ea053a/attachment-0001.htm>