[Shop-talk] Question about 1/2" belt sander belts

[Jack Brooks]

I've been very happy with 120 grit on 6061.  Be gentle, but it's a nice way for me to clean up welds and still end up with a work piece that doesn't need more work to be presentable...

Jack
________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of John Miller <jem at milleredp.com>
Sent: Monday, October 12, 2020 3:00:17 PM
To: shop-talk at autox.team.net <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] Question about 1/2" belt sander belts

On 10/12/2020 2:27 PM, Jack Brooks wrote:
> Flapper disk?  They work great on aluminum.

Coarse ones take off a lot of metal.   Fine ones load up and don't do
much.  I'm sure there's a middle ground somewhere.

John.
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20201012/9956e352/attachment.htm>