[Shop-talk] Wire splice sealant

[Ronnie Day]

Jeff looks very interesting. I’m guessing it comes in a range of sizes?
Where did you get it from?

Thanks, Ron

On Sun, Mar 16, 2025 at 7:59 PM Jeff Scarbrough <fishplate at gmail.com> wrote:

> We used to get 3M heat shrink tubing with glue/sealant inside.  I never
> had a problem with that, and it was 1/10th the trouble that this appears to
> be.
>
> https://www.3m.com/3M/en_US/p/d/b5005036041/
>
>
>
> On Sun, Mar 16, 2025 at 8:33 PM Moose <eric at megageek.com> wrote:
>
>> Braintrust-
>>
>> Have any of you ever see this...
>> https://www.amazon.com/SpliSeal-Professional-Kit-Complete-Connectors/dp/B0D9B8DCTW/ref=sr_1_3?crid=3BUKL0P7IVNW9&dib=eyJ2IjoiMSJ9.3Vxo7hR7mEIZ12qx2hsVtgw_kpHNEDXU0ensnUgqGLMqzHtH1jgBc3PlzJU5eSi3rQJTzyk84gcxa-O93kQVc5Ayt7RY4c1WGvHjW1cJOwfbotkXaaBBMl0Zm7WyBNEiuKWSDpLTpS7C9ETdliro6ZPNYxvI97c1qawWiTSQYe_dkzYi2mMD2tl-YL1OM1sWCoUTCt6dQUuNx8XIWpbtIZvKQKJzF7CCh9i82mlJ4bg.c3aPekELXi9S7dY-5c2uW2t1ipGSld
>> 6iTm8nqC1TsIY&dib_tag=se&keywords=spliseal+hot+glue+wire+splice+molds&qid=1742170485&sprefix=spliseal+%2Caps%2C176&sr=8-3
>> <https://www.amazon.com/SpliSeal-Professional-Kit-Complete-Connectors/dp/B0D9B8DCTW/ref=sr_1_3?crid=3BUKL0P7IVNW9&dib=eyJ2IjoiMSJ9.3Vxo7hR7mEIZ12qx2hsVtgw_kpHNEDXU0ensnUgqGLMqzHtH1jgBc3PlzJU5eSi3rQJTzyk84gcxa-O93kQVc5Ayt7RY4c1WGvHjW1cJOwfbotkXaaBBMl0Zm7WyBNEiuKWSDpLTpS7C9ETdliro6ZPNYxvI97c1qawWiTSQYe_dkzYi2mMD2tl-YL1OM1sWCoUTCt6dQUuNx8XIWpbtIZvKQKJzF7CCh9i82mlJ4bg.c3aPekELXi9S7dY-5c2uW2t1ipGSld6iTm8nqC1TsIY&dib_tag=se&keywords=spliseal+hot+glue+wire+splice+molds&qid=1742170485&sprefix=spliseal+%2Caps%2C176&sr=8-3>
>>
>>
>> Seems crazy expensive, but I do lots of marine wires and if they are
>> really better, I can make the case to buy it.
>>
>> Anyone ever use it?  There is only one review, and it seemed their were
>> problems with the order.
>>
>> Looking forward to what you all have to say about it.
>>
>> Couple of pluses,
>> Seems to be a very good seal
>> Don't need to worry about putting the heat tubing on before the
>> connection.
>>
>> Minuses
>> I guess you have to used their butt connectors (not really)
>> Mold release also
>> Might be hard in a tight spot.
>>
>> Do you think it's a normal glue gun?  I have a nice cordless one I would
>> rather use.
>>
>> Thanks again
>> Moose_______________________________________________
>>
>> Shop-talk at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/pipermail/shop-talk
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>>
>> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/ronnie.day@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20250316/180e5f57/attachment.htm>