[Shotimes] Hood question

[Epperly]

You could remove the SHO portion of the brace and weld it to the Sable
brace. That is what Ford did.
        Ken
----- Original Message -----
From: "Michael S Wojton" <Mike.Wojton@owens-ill.com>
Cc: <shotimes@autox.team.net>
Sent: Friday, December 13, 2002 10:31 AM
Subject: Re: [Shotimes] Hood question


> Well, he's partially right.  You may be able to use a Sable hood and trim
the
> bracing underneath, but that might be weakening the hood too much, and
> you may have problems down the line.  I would imagine the bracing for the
> SHO hoods was compensated somewhat.
>
>
> Mike Wojton
> '95 MTX
> Toledo, Ohio
> shomike@tri-statesho-svt.org
>
> K&N sans silencer cone
> SHO Shop Y-pipe
>
> "Avoid the clap." - Jimmy Dugan
>
> ------------------( Forwarded letter 1 follows )---------------------
> Date: Fri, 13 Dec 2002 09:23:52 -0600
> To: Chris.Cassino[chriscassino]@yahoo.com, shotimes@autox.team.net
> From: Paul.L.Fisher[sho]@paul-fisher.com
> Sender: shotimes-admin@autox.team.net
> Subject: Re: [Shotimes] Hood question
>
> No, the under hood bracing is different.
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 167K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley
> 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000
0W-30
> oil, Amsoil Synthetic ATF.
> '00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 34K Build date
> 11/19/1999
> - Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
> ----- Original Message -----
> From: "Chris Cassino" <chriscassino@yahoo.com>
> To: "Al Fitz" <alfitz@alfitz.com>; <IdriveaSHO@aol.com>;
> <shotimes@autox.team.net>
> Sent: Friday, December 13, 2002 09:15
> Subject: Re: [Shotimes] Hood question
>
>
> > Isn't it a Sable hood?
> >
> >
> >  Al Fitz <alfitz@alfitz.com> wrote:The hood on a SHO is a SHO ONLY hood.
> >
> > Al Fitz SHO Specials
> > http://www.alfitz.com
> >
> >
> > ----- Original Message -----
> > From:
> > To: ;
> > Sent: Thursday, December 12, 2002 6:16 PM
> > Subject: [Shotimes] Hood question
> >
> >
> > > Hey guys, my hood on my '89 has turned into a really ugly POS due to
> > sitting
> > > in the sun alot and the wind abuse of freeway speeds(not me, previous
> > owner).
> > > Anyways, I was wondering if a regular hood will work, say from an 87
or
> 88
> > > base model. I found one that is the same color, but on the SHO it has
a
> > weird
> > > dip at the back that the other one doesn't. Are these hoods only
> cosmetic
> > > diferences or will I have some clearance problem? Thanks all -Steve
"I'm
> > not
> > > a hood" Bowen
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up now
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes