[Shotimes] E-Brake Springs

[David P]

Christian,

    The spring that places tension on the e-brake is on the rear calipers.

    If your cable is sticking, you can try removing the inner cable from
it's housing(s), lubricating the housing(s) and cable, and reinserting the
cable.


David P

95MTX



~
----- Original Message -----
From: "Christian Kesselring" <ckesselring@sisna.com>
To: "Shotimes" <shotimes@autox.team.net>
Sent: Wednesday, November 06, 2002 10:05
Subject: [Shotimes] E-Brake Springs


> Can anyone tell me where I should look for the caliper springs that place
> tension on the e-brake cable?  Also, does anyone have a link to a decent
> write-up on fixing or replacing sticky e-brake cables?  Thanks in
advance...
>
> Christian Kesselring
> '92 SHO 119k
> '02 PT Cruiser 9k
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes