[Shotimes] seat and locks fixed

[Justin Schick]

With the seat out of the car, I was able to pry out the metal connector for the black wire with a white stripe (12v to the seat) and solder the wire back to it. Once installed I put my volt meter on the plug coming out of the floor pan and found it did not have any voltage. I knew the circuit breaker in the fuse box was ok, so I checked the big fuses under the hood. Sure enough the 40 amp one on the end by the two little 10 amp ones was blown. I think it said power locks on the little schematic printed on the underside of the cover, but I guess the seats are part of that circuit too. A quick trip to Orielly and back and I had 12v for the seat again. Plugged and bolted it back in, and all is well again! Thanks everyone for their input on this.

Justin Schick - '92 SHO cruising around KC MO
SHOTimes list info: http://www.shotimes.com/SHO1.html