[Shotimes] :-(

[Mark Nunnally]

> I've been lucky with my Y-pipe.  However I have had (^%#%&(& getting my
starter off.  The pan itself is worth quite a bit of #^(^% until you finally
break down and get a 1/4" universal joint to get one of those nuts off with.

    All my pipes come off easy (new studs, nuts, anti-seize, etc).  But if
all I did was run out there and pull the pipe, the starter, drain oil, put
on new filter, pull the pan, clean the pan surfaces, the block surfaces, put
in new seals, re-install the pan, the starter, and the ypipe and re-fill oil
it would take 1.5 hr at least.

mark