[Shotimes] REAR ROTORS

[Mark D. Mallory]

Have you replaced the caliper bracket?  That was the root cause of my rear
brakes acting up.  The bracket gets bent or warped and causes chirping and
groaning like you describe.  Having a bent bracket also doesn't help the
slider pins.  Took me about 1.5 years to replace the brackets and finally
fix my annoying rear brakes.

Mark Mallory
Toledo, Ohio
'95 SHO MTX

> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of BOB6867@aol.com
> Sent: Tuesday, November 19, 2002 11:19 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] REAR ROTORS
>
>
> I have a 93 SHO ATX, my rear brake rotors seam to warp or something very
> often. I have replaced the rubber brake lines, calibers, rotors, and pads
> more than once, and after a very short time, especially when
> turning corners,
> or taking off again after braking, the rear rotors make an intermittent
> groaning noise. If I tap the brake pedal,
> it quits for a moment or after I increase my speed, the noise stops. It
> sounds like the calibers are not releasing all the way, Anyone
> have any ideas
> on this? Any help will be greatly appreciated.
>
>                                                  Thanks,
>                                                  Charles Meador
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes