[Shotimes] Which MAF is best?

[James F. Ryan III]

I installed my 80mm MAF, SHO Shop LPM, can & horn in July '98 (that's almost
4 1/2 years) and I've had........ZERO problems.


Jim Ryan - Wayne, NJ
91 Plus - all white/mocha
FPS 96 brakes, Carbotech pads, LPM and 80mm MAF w/ K&N and SHO Shop can &
horn, SHO Shop Y-pipe and cat-back w/ Edelbrock mufflers, KONIs with SHO
Shop linear springs, f&r strut tower braces and poly bushings all around,
HiRevs Jr clutch and lightweight flywheel, underdrive pulleys, torque
limiters, Cincy SHO reinforced engine mounts, Bridgestone Potenza RE730
tires (excellent), and police grille.


----- Original Message -----
From: "Timothy Tyner" <shospeed@bigplanet.com>
To: <shotimes@autox.team.net>
Sent: Thursday, November 21, 2002 2:17 PM
Subject: Re: [Shotimes] Which MAF is best?


> Again, who is having the 80mm problems?  Are these guys with the right
FORD
> unit and an LPM?  Zero tuning, very enexpensive ($50) and car runs great.
> Must be a lucky one.
>
> Toolman
>
> -------Original Message-------
>
> From: Dave Kegel
> Date: Thursday, November 21, 2002 11:47:14 AM
> To: Ron Nottingham; SHOtimes
> Subject: Re: [Shotimes] Which MAF is best?
>
> I suggest the Pro-M 75mm MAF. I just ordered one, $170 to your door. This
> is the black plastic version,. You can get the chrome metal version for
> $185. It will be calibrated by Pro-M for your car, your mods, and you
don't
> have to mess with an LPM. Can't say exactly how much HP you will gain, but
> I know John Hrinsin has some dyno results for his particular car/mods that
> has before and after gains. He's on techSho though.
>
> Too many people have had problems the last year with the 80mm Ford and LPM
> combo. I wouldn't bother with that combo unless your pockets are deep,
your
> patience is long, and you've got a nearby dyno you can use for tuning.
>
> Dave Kegel
> ----- Original Message -----
> From: "Ron Nottingham" <nottingham@alltel.net>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: November 21, 2002 9:27 AM
> Subject: [Shotimes] Which MAF is best?
>
>
> > OK, beat me... I know I have asked this question before (maybe a couple
> few
> > times)...
> >
> > Which is the best best MAF, and why?
> >
> > I've decided to take the long and winding road for a modded SHO. She's
> been
> > fun stock, but instead of getting something else to mod up, my SHO has
> been
> > begging me to mod her. She's been begging for a cold air induction,
> better
> > MAF, ExtrudeHone, big-bore butterflies, Quaiffe, and possible forced
> > induction.
> >
> > So, for my Christmas present, I want SHO goodies from my wife... I need
> to
> > know what to tell her.
> >
> > Thanks again!!!
> >
> > Ron N. - Dalton, GA
> > 90 SHO
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> .
>
> [demime 0.99d.1 removed an attachment of type image/gif]
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes