[Shotimes] Re: Does anyone offer a replacement battery cable harness set?

[Dave Kegel]

I don't know if it's that simple.  If I remember correctly, on the Gen2, the
positive cable, alternator wire and the cable from the fuse box are all
spliced together.  I guess you could chop off the cable between the starter
and batter and cap it off, then just run a new cable from the battery to
starter.  Come to think of it, I think Kurt M.  had to do something similar
on his car, perhaps he'll chime in.

Dave Kegel


----- Original Message -----
From: "Paul Nimz" <niks@dlogue.net>
To: <TechSHO@topica.com>; "SHOtimes" <shotimes@autox.team.net>
Sent: November 26, 2002 10:36 AM
Subject: Re: Does anyone offer a replacement battery cable harness set?


> Does anyone offer such a thing to replace the OEM cables or is
> > this something I have to make up?
>
> I would buy ready made cables.  I know Farm & Fleet in the upper Midwest
has
> pre-made cable of various lengths with lugs attached for a good price.
And
> the cables are heavier too.  Get the Penske brand spring clamp terminals
at
> Wal-Mart for a bit of weight savings and easy attachment.  These are tin
> plated steel and similar to GEN 3 OEM, under $3.00 ea.
>
> Paul Nimz
> '97 TR SHO
> '93 EG mtx SHO
>
> ==^================================================================
> This email was sent to: d.kegel@attbi.com
>
> EASY UNSUBSCRIBE click here: http://topica.com/u/?b1dhxA.b2TC9T.ZC5rZWdl
> Or send an email to: TechSHO-unsubscribe@topica.com
>
> T O P I C A -- Register now to manage your mail!
> http://www.topica.com/partner/tag02/register
> ==^================================================================