[Shotimes] Which MAF is best?

[Jim and Debbie Leyden]

Isn't there anybody out there that is using a Wideband AFR meter to check on
the mods they make?  I would think that it would be the only way to go.

Jim
'93 MTX




----- Original Message -----
From: "John Weidenbenner" <johnjweid@earthlink.net>
To: "Ron Porter" <ronporter@prodigy.net>; <shotimes@autox.team.net>
Sent: Tuesday, November 26, 2002 8:33 AM
Subject: Re: Re: [Shotimes] Which MAF is best?


> I went through the same problems on my 93 atx. After changing to the TSB
> upgrade H3Z2 PCM I installed a BOS. I never found, after 8 program
changes,
> an LPM program compatible with the H3Z2.
>
> Paul Thomas, on the other hand, has the original 93 atx H3Z PCM  which in
> compatible with his BOS.
>
> John W.
>
> ----- Original Message -----
> From: "Ron Porter"
>
> > '89s respond well, also. I suspect it's because the BOS with the LPM was
> > developed on Vadim's '89 (only one EEC box was used in '89). Problems
seem
> > to be in the middle years, when EEC calibrations were bouncing around a
> bit.
> >
> > OTOH, Mallinson's '89 never responded to any chip or LPM, but his EEC
box
> > was replaced, and it was the new box that didn't like chips.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes