[Shotimes] Dead 93 MTX

[Dave Kegel]

All the SHO radiators come with the ATX tranny fittings now.  If you have an
MTX, you just don't hook them up.  You don't have to plug those fittings
either. They're simply to allow the trans fluid to circulate through the end
tank.

Dave Kegel
----- Original Message ----- >

> Kerry,
>  No, it isn't the same. It will have 2 fittings for tranny cooler lines on
> the passenger side. I purchased a rad from radiators.com for my 93 MTX.
What
> I got was a rad for an ATX. Whether for a SLO or SHO I know not[I
specified
> SHO], however I got the impression, after looking at the rad on a friends
> SLO, that in ATX style, they are the same . It had the fittings on the
side,
> I took it too the local hardware store and found parts to plug the
fittings,
> it's worked fine. A while ago the Godan rad from Autozone, part # 43-3891,
> was talked about, 2 row, heavy duty. I didn't look into it, but you may
want
> to.
>  Good luck, Bob 93 MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes