[Shotimes] SFC installation questions

[Paul L Fisher]

I am going to get mine done at Performance-Plus. The key is that you need a
lift that picks up the car on it's wheels, otherwise the body will flex the
wrong way and the welds will hold it the wrong way as well.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 41K Build date
11/19/1999
- Amsoil Series 2000 0W-30 oil

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Steve Tatro" <stevetatro_shotimes@att.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Thursday, April 03, 2003 7:10 AM
Subject: [Shotimes] SFC installation questions


> Where the heck do I get this done?  Any idea?  I've been toying with the
> idea of buying a set, but have no idea where to get them welded on.
>
> Anyone in the Cincy area do this or know someone who does?
>
> If I can't find someone, I'll just go ahead and order them and mix me up
> some of that JB Weld ;^)
>
> Thanks,
>
> Steve Tatro
> Red/Black '93 with 166k miles
> Cincinnati, Ohio
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes