[Shotimes] Taylor Spark Plug Wires

[alfitz@alfitz.com]

We took the individual TAYLOR wires and tested the resistance on each wire
compared to the same length FORD wires. The average resistance on the TAYLOR
wires is 50 ohms and the FORD wires were 500 ohms resistance, hence the
factor of 10.

Al Fitzgerald
alfitz@alfitz.com
----- Original Message -----
From: "Don McKinnon (AST)" <dmckinnon@asttechlabs.com>
To: <alfitz@alfitz.com>; "_SHOTIMES II" <shotimes@autox.team.net>
Sent: Wednesday, April 09, 2003 4:18 PM
Subject: RE: [Shotimes] Taylor Spark Plug Wires


> Al,
> What is the factor of 10 measurement?
>
>
>
> Don McKinnon
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of alfitz@alfitz.com
> Sent: Wednesday, April 09, 2003 5:01 PM
> To: _SHOTIMES II
> Subject: [Shotimes] Taylor Spark Plug Wires
>
>
> The Taylor spark plug wires are an 8mm wire set that are made for the SHO.
> We
> ordered 3 sets and checked the resistance, comparing it to a set of FORD
> wires
> and found the Taylor wires far superior. (by a factor of 10) We installed
> three sets on different SHOs and found they work at least as well as the
> FORD
> wires. The Taylor wires are less money and better specs than the FORD
wires.
>
> With that said, has anyone else had any experience with the Taylor wires,
> specifically the 8mm Spiro Pro Series?
>
> Al Fitzgerald
> alfitz@alfitz.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes