[Shotimes] 4corner rotor upgrade (was RE: 1st impressions on proportioning plugs)

[Ron DeReus]

So when I can afford to do the 96 upgrade on the front of my 95, I can also
upgrade the rear rotors?  Are the rears the same size for 96 and 95, so all
you have to change is the rotors, or are similar bracket, etc... changes
necessary back there, too?  TIA

Ron DeReus
95MTX (Only green one on my block, too)

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Ian Fisher
Sent: Monday, April 21, 2003 11:43 AM
To: TechSHO@topica.com; 'SHOtimes (Team.net)'; 'V8SHO'
Subject: [Shotimes] RE: 1st impressions on proportioning plugs


You have a 93. I wouldn't use those plugs unless you upgrade your rear
rotors to either the vented earlier design (require spindle swapping) or
the rear 96 vented rotors. Those 93-95 solid rotors will warp in no time
flat.