[Shotimes] AutoZone Torque Wrench

[Ron Porter]

I suspect it could vary by each individual AutoZone. I would call your local
guys and ask them. If they don't have what you want, try another store.
OTOH, they may rent you what you want by just pulling it off the shelf.

I say this based on their loaner equipment. As you may know, you basically
pay for the rented equipment, then get your $$$ back when you return it. I
suspect a bunch of folks never return stuff. When I have rented tools, I
have gotten different mfrs tools each time (like with a spring compressor).

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Paul L Fisher
Sent: Tuesday, April 22, 2003 1:38 PM
To: SHOtimes (Team.net); V8SHO
Subject: [Shotimes] Autozone Torque Wrench


Anyone have a clue what the loaner Autozone torque wrench goes up to? Their
web page doesn't say. My Craftsman only goes to 150 ft. lbs. and I want to
make sure my front wheel bearing nut is tight enough but not too tight.

Is Bob Fijal still on here?

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes