[Shotimes] Rear Suspension Question??

[Paul L Fisher]

Swaybar end links? Strut mounts? End links are the easiest to change, the
strut mounts require pulling the springs out again.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: "Jeff Hancock" <lkhdjeff@bellsouth.net>
To: <shotimes@autox.team.net>
Sent: Wednesday, April 23, 2003 7:31 AM
Subject: [Shotimes] Rear Suspension Question??


> Hey Gang,
>
> I installed new Tokicos and cargo springs on the rear this weekend and
raised
> the sagging rear but I still hear a thud whenever I hit a good bump. Any
> suggestions?
>
> Thanks in advance for your input!!
>
> Jeff
> '91 SHO+
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003