[Shotimes] Finally have the SHO back together
Paul L Fisher
sho@paul-fisher.com
Wed, 23 Apr 2003 15:50:34 -0500
After 3 months, I have finally put on:
1. GTP rear control arms
2. TPR rear swaybar endlinks
3. Front lower control arms
4. front strut rods and all the related bushings
5. '96 brake upgrade.
6. proportioning plugs.
7. front strut mounts and bearings.
8. Flushed brake fluid.
9. New rear rotors
10. New rear calipers
11. Performance Friction Carbon Metallic rear pads
12. H-box brace.
13. Front swaybar end links.
14. Hand washed it with Ivory soap.
All I need to do now is get the ABS unit bled (let the reservoir get too low
when I was flushing) and an alignment. I should also Lexol the leather.
Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.
SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm
Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003