[Shotimes] Rear Sway Bar Endlinks

[Paul L Fisher]

Mine were red. Of course, they have been sitting in the garage for a year or
2. I cut 1/2" off because the Eibach's lower the car 1/2" from stock.
Addco's web site (http://www.addco.net/install.shtml) says "for
raised/lowered vehicles, use original functional height plus/minus vehicle
height change".

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 171K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message -----
From: <shewitt@hypercon.net>
To: <shotimes@autox.team.net>
Sent: Thursday, April 24, 2003 9:19 AM
Subject: [Shotimes] Rear Sway Bar Endlinks


> I picked up 2 of the 18145HDs for my new 26mm bar.  I
> noticed Paul F. had cut the end links down some to shorten
> them up.  Why?  Comparing them to the old ones, they are
> about 0.5" longer.  Should I trim the spacer rod down
> some?
>
> BTW, the bushings are black on the end links.  I bought
> them from Advance yesterday.
>
> Thanks,
> Scot
> 95 Red MTX - 66k
> Lewiston, NY
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003