[Shotimes] rod bearings

[Ron Porter]

That's fine, as long as they don't go in dry you are OK. Even oil on the
backside of the bearing is no BFD, as long as the front is lubed. When you
snap the bearing into the rod and rod cap, it'll squeeze out that oil,
anyway.

Ron Porter 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Dave Kegel
Sent: Tuesday, April 29, 2003 3:08 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] rod bearings


Hell, Kurt and I just dunked ours in motor oil, but apparently that's not
such a hot idea.  :)

Dave Kegel

----- Original Message -----
From: "Ron Porter" <ronporter@prodigy.net>
To: "'Paul L Fisher'" <sho@paul-fisher.com>; "'Kerry Kinion'"
<kerry@kinionfurniture.com>; <shotimes@autox.team.net>
Sent: April 29, 2003 1:57 PM
Subject: RE: [Shotimes] rod bearings


> Don't even need that, I use the AZ equivalent of STP, which cost less than
a
> dollar. Engine oil is fine, also, but I like the thicker stuff.
>
> Ron Porter
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes