[Shotimes] MAF connector question

[Mark Nunnally]

> Understandable Carl, but I'll revert back to my original thought...  I'm
> making 300+ HP with a 73mm and a 65mm TB on my Stang.  I also can't see
how
> an 80mm would be able to sample the air more accurately than any other
good
> quality MAF.

Ideally you want to work with the MAF sensor voltage with a little
headroom!!! (same with injectors).  If you have an 850 kg/hr meter
(regardless of size) and are making 300 hp and you are getting almost 5 peak
volt on the MAF (this is what the EEC is seeing) you need a different curve.
You'd need to jump up to an 1100 kg/hr curve/MAF, and try to limit your peak
voltage to maybe 4.2-4.5.  You can tune better (and the EEC can trim fuel
better) when you are working on the lower end of the curve.

mark