[Shotimes] MAF connector question

[Jonathan Zane KC2ENA]

I called C&L before I left work last night.  I was talking with them about
my MAF Overflow problem on the stang.  When he asked what kind of horsepower
I was making I told him we are estimating about 300hp.  He said "there's no
way you are over flowing that 73mm meter with 300hp".  He said sometimes you
can get a false reading when the throttle snaps shut, sending a high
voltage.  I'm not sure how this happens but apparently it's a phenomenon
that people experience sometimes.  So I need to watch the software and see
exactly when the error occurs.  If it's during WOT I may need to try another
sensor or trash the speed brain.  Leaving the whole accuracy and fuel curve
discussion behind, I'm still confused how any after market MAF can hit 5
volts on a 3.0L/3.2L if C&L swears I can't over flow a 73mm with my 300hp
Stang.

Jonathan Zane
1988 Mustang LX
1995 Taurus SHO
1993 Taurus SHO
1979 F-150 4x4
1989 Ford Festiva
2001 Raptor
www.njfourwheelers.com/jon.html

--
This message was sent with an unlicensed evaluation version of
Novell NetMail. Please see http://www.netmail.com/ for details.