[Shotimes] Rod bearings again

[Steve Tatro]

You only NEED it on the crank side, but it won't hurt anything if you
get it all over.

Steve Tatro 
Red/Black '93 with 169k miles 
Cincinnati, Ohio 



-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
Sent: Tuesday, August 19, 2003 6:31 PM
To: '`V6 SHOtimes'
Subject: [Shotimes] Rod bearings again


When I put assembly lube on the bearings do I put a thin film on bothe
sides or just the side facint the crank?
 
Thanks
 

Bruce Malachuk

94 Opal Frost MTX

93 Black ATX soon to be parts

93 Green MTX - black interior.....soon to be mine
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes